RAM-HOL-PD2U Universal Side Gripping Cradle works with MOTONAV

The RAM-HOL-PD2U is a universal high strength composite finger gripping cradle designed to hold electronic devices within the following size dimensions: 

RAM-HOL-PD2U Cradle Dimensions:
Length Sizes for Each Set of Arms (3 Arm Sets Included):
Short Arm Length Size: 1/2 inch
Medium Arm Length Size: 7/8 inch
Long Arm Length Size: 1 3/16 inch

Cradle Clamping Dimensions:
Height Range: Open
Width Minimum: 2 7/8 inches
Width Maximum: 3.5 inches
Thickness Minimum: 3/8 inch
Thickness Maximum: 1 1/8 inches

Below are some popular electronic devices that this cradle will accommodate:

Bendix/King AV80R
Mio c310
Mio c510e
Mio c710
Navman iCN 320
Navman iCN 510
Navman iCN 520
Navman iCN 540
Navman iCN 550
Navman iCN 570
Navman iCN 750
Sony PSP
TomTom GO 930
TomTom GO 930T

RAM-HOL-PD2U cradle shown above. 

RAM-HOL-PD2U Features:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Cradle Material: Black high strength composite.
Cradle Hole Pattern: The back of the cradle has two pre-drilled holes compatible with the AMPS hole pattern (1.912 inches from center hole to center hole).
Cradle Description: The RAM-HOL-PD2U includes three (3) sets of side clamping arms. Each set of arms includes three (3) individual arms which connect to the slots on the side of the cradle. The arms have a rubber tip for an optimum hold, and you can remove and change the arms so you can find the right clamping hold for you device.
Cradle Hardware: Includes a set of nuts and bolts to connect to the OPTIONAL RAM-B-238U diamond plate adapter.
Optional Cradle Adapter: The optional RAM-B-238U is a diamond plate adapter with two pre-drilled holes (compatible with the AMPS hole pattern) that attaches to the back of the cradle. The RAM-B-238U has a 1 inch rubber ball that will connect to other RAM 1 inch socket accessories (i.e. RAM-B-201 series arm, etc).

Optional Mounting Assemblies. Click here to see all optional mounting assemblies compatible with the cradle specified above including waterproof aqua boxes with soft touch flex lens that allows the controls of electronic devices to remain operational.

Below are optional mounting assemblies that can be attached directly to the RAM Mounts cradle and popular accessories.

Additional Cradles for Electronic Devices:
- Select another cradle for Apple, cell phones, GPS systems and other electronic devices by clicking here.

Universal Diamond Adapter Plate for RAM Cradles:
- RAM-B-238U diamond adapter plate is the most common type of adapter used to attach to RAM cradles (RAM-HOL-xxxx). The RAM-B-238U is required to attach to any RAM 1 inch ball sized arm.

Waterproof Aqua Box with Soft Touch Flex Lens:
- Click here to see waterproof aqua boxes with soft touch flex lens. The soft touch flex lens allows the touch screen of electronic devices such as iPhone or GPS devices to remain operational.Knock-out hole allows cables to be run through the back of the aqua box.
- The electronic device sits in the aqua box using included foam inserts. The RAM-HOL-xxxx cradle is not needed to secure the electronic device in the aqua box. Padlock not included.
- Can be mounted in the vertical or horizontal position.
- Attaches directly to the optional RAM-B-202U round adapter.

Aviation Assembly Options:
- Click here to see all aviation assembly mounting options.

Flat Surface Assembly Options:
- Click here to see all B sized 1" ball flat surface assemblies.

Motorcycle/ ATV/ Mountain and Road Bike Assembly Options:
- Click here to see all motorcycle assembly mounting options.
- Click here to see all ATV assembly mounting options.
- Click here to see road and mountain bike assembly options.

Suction Cup Assembly Options:
- Click here to view all suction cup mounts from light duty to heavy duty triple suction cup mounts.

RAM-A-CAN, Mirror Mate and Adhesive Assembly Options:
Click here to see the RAM-A-CAN cup holder mounting assemblies.
Click here to see the RAM Mirror Mate mounting assemblies.
Click here to see adhesive mounting assemblies.

RAM-MAG1U Screen Magnifier Option:
- Click here to see 2 inch x 4 inch 2x zoom screen magnifier. The screen magnifier connects between the RAM cradle and optional RAM-B-238U adapter.
Portability: The RAP-326 quick release adapter allows the cradle to be easily removed and moved to another mounting device without tools.
- Perfect for sharing electronic device between applications (i.e. motorcycle Garmin GPS device moved to automobile suction cup mount).
- Includes RAP-326FU female and RAP-326MU male adapters.
- Quick release allows the electronic device to stay attached in the cradle while quickly being disconnected from the RAM-B-238U. Cradle can then be re-attached to another mounting application that also has the RAM-B-238U.
- Requires the RAP-326MU male adapter for the second application being attached too. The RAP-326FU mates to the RAP-326MU and the RAP-326MU mates to the RAM-B-238U.

themountdepot.com

LAPTOP & CONSOLE MOUNTS

RECREATIONAL MOUNTS