RAM-HOL-GA48U RAM Mount Garmin Cradle for eTrex 10, 20, 30 Series

The RAM-HOL-GA48U is a high strength composite cradle designed to hold the following devices:

Garmin eTrex 10
Garmin eTrex 20
Garmin eTrex 30

NOTE: As the manufacturer adds new models this cradle may fit additional models not listed above. CLICK HERE for the latest GPS guide or contact us by CLICKING HERE.

 

RAM-HOL-GA48U cradle shown above. 

RAM-HOL-GA48U Features:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Cradle Material: Black high strength composite.
Cradle Hole Pattern: The back of the cradle has two pre-drilled holes compatible with the AMPS hole pattern (1.912 inches from center hole to center hole).
Cradle Description: Place the top of the electronic device into the cradle, and then push the base into the expandable arms at the bottom of the cradle. The arms will then snap into place when the electronic device is completely secured in the cradle. The cradle allows all cables (NOT INCLUDED) to stay connected and all buttons/ports remain accessible.
Cradle Features:

1. Open access to all electronic ports including audio port, speaker/mic and mini USB.
2. Patent pending roller design for super smooth placement and removal of the GPS.
3. Custom pocket for factory dock.

Cradle Hardware: Includes a set of nuts and bolts to connect to the OPTIONAL RAM-B-238U diamond plate adapter.
Optional Cradle Adapter: The OPTIONAL RAM-B-238U is a diamond plate adapter with two pre-drilled holes (compatible with the AMPS hole pattern) that attaches to the back of the cradle. The RAM-B-238U has a 1 inch rubber ball that will connect to other RAM 1 inch socket accessories (i.e. RAM-B-201 series arm, etc).

Optional Mounting Assemblies. Click here to see all optional mounting assemblies compatible with the cradle specified above including waterproof aqua boxes with soft touch flex lens that allows the controls of electronic devices to remain operational.

Below are optional mounting assemblies that can be attached directly to the RAM Mounts cradle and popular accessories.

Additional Cradles for Electronic Devices:
- Select another cradle for Apple, cell phones, GPS systems and other electronic devices by clicking here.

Universal Diamond Adapter Plate for RAM Cradles:
- RAM-B-238U diamond adapter plate is the most common type of adapter used to attach to RAM cradles (RAM-HOL-xxxx). The RAM-B-238U is required to attach to any RAM 1 inch ball sized arm.

Waterproof Aqua Box with Soft Touch Flex Lens:
- Click here to see waterproof aqua boxes with soft touch flex lens. The soft touch flex lens allows the touch screen of electronic devices such as iPhone or GPS devices to remain operational.Knock-out hole allows cables to be run through the back of the aqua box.
- The electronic device sits in the aqua box using included foam inserts. The RAM-HOL-xxxx cradle is not needed to secure the electronic device in the aqua box. Padlock not included.
- Can be mounted in the vertical or horizontal position.
- Attaches directly to the optional RAM-B-202U round adapter.

Aviation Assembly Options:
- Click here to see all aviation assembly mounting options.

Flat Surface Assembly Options:
- Click here to see all B sized 1" ball flat surface assemblies.

Motorcycle/ ATV/ Mountain and Road Bike Assembly Options:
- Click here to see all motorcycle assembly mounting options.
- Click here to see all ATV assembly mounting options.
- Click here to see road and mountain bike assembly options.

Suction Cup Assembly Options:
- Click here to view all suction cup mounts from light duty to heavy duty triple suction cup mounts.

RAM-A-CAN, Mirror Mate and Adhesive Assembly Options:
Click here to see the RAM-A-CAN cup holder mounting assemblies.
Click here to see the RAM Mirror Mate mounting assemblies.
Click here to see adhesive mounting assemblies.

RAM-MAG1U Screen Magnifier Option:
- Click here to see 2 inch x 4 inch 2x zoom screen magnifier. The screen magnifier connects between the RAM cradle and optional RAM-B-238U adapter.
Portability: The RAP-326 quick release adapter allows the cradle to be easily removed and moved to another mounting device without tools.
- Perfect for sharing electronic device between applications (i.e. motorcycle Garmin GPS device moved to automobile suction cup mount).
- Includes RAP-326FU female and RAP-326MU male adapters.
- Quick release allows the electronic device to stay attached in the cradle while quickly being disconnected from the RAM-B-238U. Cradle can then be re-attached to another mounting application that also has the RAM-B-238U.
- Requires the RAP-326MU male adapter for the second application being attached too. The RAP-326FU mates to the RAP-326MU and the RAP-326MU mates to the RAM-B-238U.

themountdepot.com

LAPTOP & CONSOLE MOUNTS

RECREATIONAL MOUNTS