Home > Motorcycle Mounts > Motorcycle Components (Adapters, Arms, Bases, Cradles, Hardware, Accessories, etc.) > Cradles (Apple, Cell, GPS, XM/Sirius Radio) > Apple Cradles/Holders > iPad Cradles >

RAM-HOL-AP8LU Locking Cradle for Apple iPad 3, iPad HD, iPad 2, iPad and HP TouchPad WITHOUT Case or Cover
RAM-HOL-AP8LU Locking Cradle for Apple iPad 3, iPad HD, iPad 2, iPad and HP TouchPad WITHOUT Case or Cover


 
Price $66.99


STOCK STATUS: Out of Stock - Email for ETA


Product Code: RAM-HOL-AP8LU

Additional 1" Ball Adapter Plates

1.0" Ball Adapters:

Popular Accessories and Hardware

Accessories:


QTY:  
DESCRIPTION PRODUCT OPTIONS
 
The RAM-HOL-AP8LU is a high strength composite cradle with dial combination lock included designed to hold the following devices (WITHOUT a bumper cover, case or skin):
  • Apple iPad 1st Generation
  • Apple iPad 2
  • Apple iPad 3 / iPad HD
  • HP TouchPad 1st Generation
NOTE: As the manufacturer adds new models this cradle may fit additional models not listed above. Please call 224-578-9162 or complete the product inquiry form by clicking here.
RAM-HOL-AP8LU cradle shown above. Electronic device not included.
RAM-HOL-AP8LU Features:
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Cradle Material: Black high strength composite.
  • Cradle Hole Pattern: The back of the cradle has four pre-drilled holes compatible with the AMPS hole pattern (1.912 inches from center hole to center hole).
  • Cradle Lock: Dial combination lock.
  • Cradle Description: Place the top of the electronic device into the cradle, and then push the base into the expandable arms at the bottom of the cradle. The arms will then snap into place when the electronic device is completely secured in the cradle. The cradle allows all cables (NOT INCLUDED) to stay connected and all buttons/ports remain accessible.
  • Cradle Hardware: Includes a set of nuts and bolts to connect to the OPTIONAL RAM-B-202U round adapter plate.
  • Optional Cradle Adapter: The optional RAM-B-202U is a 2.5 inch diameter round adapter plate with four pre-drilled holes (compatible with the AMPS hole pattern) that attaches to the back of the cradle. The RAM-B-202U has a 1 inch rubber ball that will connect to other RAM 1 inch socket accessories (i.e. RAM-B-201 series arm, etc).


ACCESSORIES FOR THIS PRODUCT...
Double Socket Standard (Medium) Length Sized Arm for 1 Inch Ball (3.69 Inches Overall Length) Universal RAM POD I Single Leg Vehicle Base with 18" Long Leg and 2.5 Inch Round Plate with 1 Inch Dia. Ball Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) with Standard Sized Arm and Universal Round Plate with 1.0 Inch Dia. Rubber Ball Universal 2.5 Inch Round Aluminum Plate with 1 Inch Dia. Rubber Ball (AMPS Hole Compatible)
Price $18.99

Add
Price $44.49

Add
Price $54.99

Add
Price $9.99

Add
Double Socket Standard (Medium) Length Sized Arm for 1 Inch Ball (3.69 Inches Overall Length) Universal RAM POD I Single Leg Vehicle Base with 18" Long Leg and 2.5 Inch Round Plate with 1 Inch Dia. Ball Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter)  with Standard Sized Arm and Universal Round Plate with 1.0 Inch Dia. Rubber Ball Universal 2.5 Inch Round Aluminum Plate with 1 Inch Dia. Rubber Ball (AMPS Hole Compatible)
2.5 Inch Diameter Base with Standard Sized Length Arm and 2.5 Inch Diameter Mounting Plate Double Socket Arm Keyed Lock for RAM-B-201 Series with 1/4"-20 Brass Hole Double Socket Standard Length LOCKING Arm for 1 Inch Ball Universal COMPOSITE Aviation Yoke "C" Clamp Base (Fits Rail/Edge Lip from 0.625" to 1.25") with Standard Sized Arm and Universal Round Adapter Plate
Price $33.49

Add
Price $29.49

Add
Price $45.99

Add
Price $42.49

Add
2.5 Inch Diameter Base with Standard Sized Length Arm and 2.5 Inch Diameter Mounting Plate Double Socket Arm Keyed Lock for RAM-B-201 Series with 1/4"-20 Brass Hole Double Socket Standard Length LOCKING Arm for 1 Inch Ball Universal COMPOSITE Aviation Yoke "C" Clamp Base (Fits Rail/Edge Lip from 0.625" to 1.25") with Standard Sized Arm  and Universal Round Adapter Plate
Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Standard Sized Length Arm & 2.5 Inch Dia. Plate Double Socket LONG Length Sized Arm for 1 Inch Ball (6.0 Inches Overall Length) Single 3.25" Dia. Suction Cup Base with Twist Lock, Aluminum Standard Length Sized Arm and 2.5" Dia. Plate (Medium Duty)
Price $42.99

Add
Price $27.49

Add
Price $45.49

Add
Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Standard Sized Length Arm & 2.5 Inch Dia. Plate Double Socket LONG Length Sized Arm for 1 Inch Ball (6.0 Inches Overall Length) Single 3.25" Dia. Suction Cup Base with Twist Lock, Aluminum Standard Length Sized Arm and 2.5" Dia. Plate (Medium Duty)


Browse for more products in the same category as this item:

Motorcycle Mounts > Motorcycle Components (Adapters, Arms, Bases, Cradles, Hardware, Accessories, etc.) > Cradles (Apple, Cell, GPS, XM/Sirius Radio) > Apple Cradles/Holders > iPad Cradles
Electronic Cradles & Holders > Apple > iPad, iPad Air and iPad Mini