Home > Aviation and Yoke Mounts > Aviation Assemblies (No Cradle) > Glare Shield Assemblies >

  U Clamp (Aviation Glare Shield) Fits Flat Edge 0.17" to 1.12" with Short Sized Arm and Extension Plate for Garmin GPSMAP 696
 
 
Price $42.25


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAM-B-177-125U
Qty:

DESCRIPTION
 
The RAM-B-177-125U is a glare shield clamp base mount that will fit edges from .17 to to 1.12 inches, short length sized arm and aluminum extension plate with pre-drilled holes. This mount will fit the following Garmin devices:
  • GPSMAP 696

NOTE: As the manufacturer adds new units/models to the above series this cradle may fit additional models not listed above. Click here to see the latest information for the RAM-B-125BU or complete the product inquiry form by clicking here.


RAM-B-177-125U shown above.

RAM-B-177-125U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Base Included: RAM-B-259U powder coated marine grade aluminum u-channel clamp base with two composite screws. This glare shield clamp mount with clamp mounts is designed to mount to the lip edge of a flat surface up to 1.12 inches thick.
    • This mount will attach to flat surfaces with the following dimensions:
      Min: 4.4mm / 0.17 inches
      Max: 28.0mm / 1.12 inches
      
  • Arm Included: RAM-B-201U-A short length powder coated marine grade aluminum dual socket arm that measures 1.75 inches long from socket center to socket center and 2.4375 inches in total length. This arm allows a 1 inch diameter ball accessory to be connected at either end. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories. 
       
  • Adapter Included: RAM-B-125BU black powder coated marine grade aluminum extension plate with pre-drilled holes.
   


Browse for more products in the same category as this item:

Aviation and Yoke Mounts > Aviation Assemblies (No Cradle) > Glare Shield Assemblies
Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Glare Shield RAM-B-177 Series Assemblies (Fits Flat Edge 0.17" to 1.12") > Garmin Assemblies


U Clamp (Aviation Glare Shield) Fits Flat Edge 0.17" to 1.12" with Short Sized Arm and Garmin RAM-HOL-GA7U Holder (Selected GPSMAP 176x, 196x, 276x, 296x and 396 Series) $38.90
Single 3.25" Dia. Suction Cup Base with Twist Lock, Aluminum Standard Length Sized Arm and RAM-HOL-AP8U Holder for Apple iPad, iPad 2 and HP TouchPad WITHOUT Case or Cover $51.45
Flexible Suction Cup Adhesive Dashboard Adapter with Suction Mount Twist Lock for Apple, Cell and GPS $22.30
U Clamp (Aviation Glare Shield) Fits Flat Edge 0.17" to 1.12" with Short Sized Arm and RAM-HOL-AP8U Holder for Apple iPad, iPad 2 and HP TouchPad WITHOUT Case or Cover $52.25
Double Socket CHROME Short Length "A" Arm for 1 Inch Ball $35.95
Universal Plate 45 Degree Angle with 9 Millimeter Hole with Standard Sized Arm and Self Leveling Cup Holder $38.95
RAM-A-Can with 6" Flexible Arm and Magellan RAM-HOL-MA9U Holder (Selected Triton 200, 300, 400 and 500 Series) $36.15
U Clamp (Aviation Glare Shield) Fits Flat Edge 0.17" to 1.12" with Short Sized Arm and Lowrance RAM-HOL-LO3U Holder (Selected AirMap & iFinder Series) $39.65
Brake/Clutch Assembly Mount or U-Bolt Handlebar Mount with Standard Sized Arm and Apple RAM-HOL-AP1U Holder (iPod Classic Gen 1 to Gen 5 (iPod Classic Gen 1 to Gen 5 WITHOUT Case or Cover) $36.15