NOTE: As
the manufacturer adds new units/models to the above series this cradle
may fit additional models not listed above. Please call 224-578-9162
or complete the product inquiry form by clicking here.
RAM-B-174-GA14U
Includes the Following:
- Warranty: Manufacturer's, RAM Mounts (National
Products Inc.), Limited Life Time Warranty
- Base: RAM-B-309-1U black powder coated motorcycle brake/clutch assembly base with 1 inch ball.
- Arm: RAM-B-201U standard
length arm for 1 inch balls. The arm measures 3 inches between
socket centers. Black powder coated marine grade aluminum with plastic
twist knob. A shorter arm, 1.75 inches from socket center to socket center, is available. Please see the RAM-B-201U-A.
- Adapter: RAM-B-238U black powder coated marine grade
aluminum universal diamond plate. Two holes measuring 1.9 inches
from center to center.
- Cradle: RAM-HOL-GA14U high strength plastic holder. Place the top
of the GPS unit into the cradle, and then push the base into the expandable
arms at the bottom of the holder. The arms will then snap into place when
the GPS is completely secured in the cradle. The cradle allows all cables
(not included) to stay connected while the GPS unit is in the cradle.
RAM-B-309-1U Description: Black powder coated marine grade aluminum handlebar brake/clutch assembly base with 1 inch rubber ball. This base is part of the RAM-B-309 family and can attach to either the left or right side of the handlebar assembly. The base fits the brake/clutch housing assembly on your motorcycle with
40mm x 6mm stainless steel hardware, provided in the kit. The two holes centers in the base have a minimum width of 0.94 inches and a maximum of 1.58 inches and can be viewed in the PDF design drawing by clicking here.
RAM-B-309-1U Options: Attach an extra ball to the RAM-B-309-1 base with the RAM-B-309-3U shown below. This ball can be used to mount additional accessories such as a self leveling cup holder or other electronic devices.
RAM-B-201U Description: Standard
length powder coated marine grade aluminum dual socket arm that measures 3.0
inches long from socket center to socket center and 3.69 inches in total
length. This arm allows a 1 inch diameter ball accessory to be connected at
either end. A tightening knob on the side of the arm enables the sockets to
clamp firmly to the attached accessories. The arm allows for easy adjustment by
loosening the side knob, a single spring inside the arm opens the sockets,
allowing the arm to pivot on the attached accessory. This enables the arm
and accessories to be positioned at various angles allowing the ultimate in
position flexibility. Loosen the knob completely and the arm will disconnect
from the accessories.
RAM-B-201U Option: See RAM-KNOB3LU keyed lock below.
RAM-B-238U Description: The
universal diamond plate is a powder coated marine grade aluminum plate
that measures 1.25 inches * 2.5 inches. This diamond plate connects to a
1 inch diameter rubber ball. The diamond plate has two holes positioned
1.9 inches from center to center. The hole pattern found on the diamond plate
will connect to a large variety of third party cradles and mounts (including
RAM holders RAM-HOL-xxxx) and including those with the industry standard AMPS
hole pattern.
RAM-B-238U Option: See RAP-326 Quick Release Adapter below.
Apple, Cell
Phone, GPS and Universal Cradle Options:
Select another holder for
Apple, cell phones and GPS systems by clicking here.
Security and
Portability Options:
The RAP-326 quick release adapter allows
the cradle to be easily removed if sharing the electronic device between
applications (i.e. motorcycle to automobile). The RAM-KNOB-3LU is a popular option. A keyed twist lock knob replaces the twist knob on the RAM-B-201 series arm.
Screen
Magnification Options:
The RAM-MAG-1U is a screen magnifier that is 2
inches by 4 inches with a 2x zoom.
Waterproof Aqua
Boxes and Cup Holder Options:
Other popular
options include waterproof aqua boxes
and a self leveling cup holder.
Please click on the above parts for
more detailed information.
RAM-B-174-GA14U shown above.
Picture shown with optional WATERPROOF AQUA BOX holder above. Consider a Waterproof Aqua Box for foul weather conditions. The RAM Mounts cradle/holder (i.e. RAM-HOL-xxxx) is not required if a waterproof aqua box is used. 
