RAM-B-174-AQ3U
Includes the Following:
- Warranty: Manufacturer's, RAM Mounts (National
Products Inc.), Limited Life Time Warranty
- Base: RAM-B-309-1U black powder coated motorcycle brake/clutch assembly base with 1 inch ball.
- Arm: RAM-B-201U standard
length arm for 1 inch balls. The arm measures 3 inches between
socket centers. Black powder coated marine grade aluminum with plastic
twist knob. A shorter arm, 1.75 inches from socket center to socket center, is available. Please see the RAM-B-201U-A.
- Adapter: RAM-B-202U black powder coated marine grade
aluminum universal 2.5 inch round plate.
- Aqua Box: RAM-HOL-AQ3U high strength plastic waterproof electronic device holder for small sized electronic devices.
RAM-B-309-1U Description: Black powder coated marine grade aluminum handlebar brake/clutch assembly base with 1 inch rubber ball. This base is part of the RAM-B-309 family and can attach to either the left or right side of the handlebar assembly. The base fits the brake/clutch housing assembly on your motorcycle with
40mm x 6mm stainless steel hardware, provided in the kit. The two holes centers in the base have a minimum width of 0.94 inches and a maximum of 1.58 inches and can be viewed in the PDF design drawing by clicking here.
RAM-B-309-1U Options: Attach an extra ball to the RAM-B-309-1 base with the RAM-B-309-3U shown below. This ball can be used to mount additional accessories such as a self leveling cup holder or other electronic devices.
RAM-B-201U Description: Standard
length powder coated marine grade aluminum dual socket arm that measures 3.0
inches long from socket center to socket center and 3.69 inches in total
length. This arm allows a 1 inch diameter ball accessory to be connected at
either end. A tightening knob on the side of the arm enables the sockets to
clamp firmly to the attached accessories. The arm allows for easy adjustment by
loosening the side knob, a single spring inside the arm opens the sockets,
allowing the arm to pivot on the attached accessory. This enables the arm
and accessories to be positioned at various angles allowing the ultimate in
position flexibility. Loosen the knob completely and the arm will disconnect
from the accessories.
RAM-B-201U Option: See RAM-KNOB3LU keyed lock below.
RAM-B-202U Description: Marine grade aluminum universal 2.5 inch round plate with a 1.0
inch diameter rubber ball. This universal round plate has pre-drilled holes and will connect to a large variety of
third party cradles and mounts (including RAM plastic holders RAM-HOL-xxxx) and including
those with the industry standard AMPS hole pattern.
RAM-HOL-AQ3U Description: High strength composite aqua box is
designed to hold a large number of different kinds of small sized electronic
devices. The aqua box has a clear
flex-lens allowing you to press and operate the buttons of your electronic device
when placed in the aqua box. Foam pads are included to secure the electronic device once in the aqua box. Please see internal dimensions below to determine if the aqua box will fit your electronics device. Punch out holes can be knocked out to run cables in the back of the aqua box. The aqua box will accommodate a small padlock (not included) for security.
NOTE: The aqua box can not be returned if the knock out holes are punched out. Please see Return Policy for additional details.
RAM-HOL-AQ3U Features:
1. A unique, patented pending all inclusive seal and Flex-Lens. This is really cool stuff!
2. Touch through lens to operate buttons.
3. Power, earphone and accessory cables are routed through a patent pending, self draining baffle design to keep moisture out.
4. Fits any RAM Mounting System for use on Planes, Motorcycles, Boats, ATVs, Bikes, etc.
5. Easily locks with any standard mini padlock.
6. All marine grade construction including stainless steel hinge pin and mounting hardware.
7. Flex-Lens may be replaced in seconds if scratched or damaged. (inexpensive)
8. Lifetime Warranty on all components other than Flex-Lens.
RAM-HOL-AQ3U Internal Dimensions: Width=2.38", Height=4.63", Depth=1.13"
Apple, Cell
Phone, GPS and Universal Cradle Options:
Select another holder for
Apple, cell phones and GPS systems by clicking here.
Security and
Portability Options:
The RAM-KNOB-3LU is a popular option. A keyed twist lock knob replaces the twist knob on the RAM-B-201 series arm.
Cup Holder Options:
Other popular
options include a self leveling cup holder.
Please click on the above parts for
more detailed information.
RAM-B-174-AQ3U shown above.
RAM-B-174-AQ3U components shown above (RAM-B-309-1, RAM-B-201U, RAM-B-202U and RAM-HOL-AQ3U with padlock not included).
