Home > Apple Assemblies with Cradle > iPhone Assemblies > iPhone 5, 5S Assemblies >

Brake/Clutch Assembly Mount or U-Bolt Handlebar Mount with Standard Sized Length Arm and RAM-HOL-AP11U Apple iPhone 5 Holder (Fits iPHone 5/5S WITHOUT Case or Cover)
Brake/Clutch Assembly Mount or U-Bolt Handlebar Mount with Standard Sized Length Arm and RAM-HOL-AP11U Apple iPhone 5 Holder (Fits iPHone 5/5S WITHOUT Case or Cover)


 

STOCK STATUS: Out of Stock - Email for ETA


Product Code: RAM-B-174-AP11U
QTY:

DESCRIPTION
 
The RAM-B-174-AP11U is a marine grade aluminum brake/clutch assembly (includes hardware) or motorcycle handlebar base (zinc u-bolts fits .5 to 1.25 inch rail diameter), standard sized length arm, diamond adapter plate and cradle for the device(s) specified below:
  • Apple iPhone 5, 5S

NOTE: This assembly WILL NOT FIT the 1st, 2nd, 3rd or 4th generation iPhone's. Please see the RAM-B-174-AP9U for the iPhone 4.

NOTE: As the manufacturer adds new units/models to the above series this cradle may fit additional models not listed above. Click here for the most current model information on the RAM-HOL-AP11U. Please call 224-578-9162 or complete the product inquiry form by clicking here.
RAM-B-174-AP11U shown above.
 
RAM-B-174-AP11U Manufacturer Included Features:
NOTE:
Manufacturer features and specifications can change without notice. Please visit the manufacturer's website for the latest product information. 
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Dimensions: See Technical Specs above to view dimensions. 
  • Click on individual links to view more information.
  • Included Base: RAM-B-309-7U black powder coated marine grade aluminum brake/clutch assembly or motorcycle handlebar base with 1 inch diameter rubber ball. Fits either left or right side of the brake/clutch assembly or handlebar rail.
    • Brake/Clutch Hardware Description:
      • Two hole centers in the base have a minimum width of 0.94 inches and maximum of 1.58 inches.
      • Includes Two 6mm X 55mm Machine Screws.
      • Includes Two 1/4''-20 X 2 Inch Long Machine Screws.
      • Includes Two 1/4'' Lock Washers and Two Rubber Caps.
    • Handlebar or Rail Mount Hardware Description:
      • Includes RAM-HAR-SU251Z Zinc U-Bolt Hardware Pack for .5 to 1.25 inch rail diameter.
      • Includes One 1 Inch Zinc U-bolt.
      • Includes One 1.25 Inch Zinc U-bolt.
      • Includes two nuts, u-bolt plastic caps and the RAP-319 composite reducer that allows a rail diameter down to .5 inch when used with the 1 inch zinc u-bolt.
  • Optional Stainless Steel U-bolts:
    • RAM-HAR-SU251 1.0 inch stainless steel u-bolt, is available. 
    • RAM-SU2512U 1.25 inch stainless steel u-bolt, is available. 
  • Included Arm: RAM-B-201U black powder coated marine grade aluminum standard sized length arm for 1 inch balls.
    • Measures 2.875 inches between socket centers.
    • Measures 3.69 inches in overall total length.
    • The arm allows for easy adjustment by loosening the plastic side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached base accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.
    • Optional Arm:
      • RAM-B-201U-A 1.75 inches from socket center to socket center is available.
  • Included Adapter: RAM-B-238U black powder coated marine grade aluminum universal diamond plate with attached 1 inch diameter rubber ball.
    • Two holes measuring 1.9 inches from center hole to center hole.
    • Compatible with AMPS hole pattern. The adapter will connect to RAM cradles (RAM-HOL-xxxx series) and third party cradles with the AMPS hole pattern.
  • Included Cradle: RAM-HOL-AP11U high strength plastic holder for the devices specified above attaches to the RAM-B-238U adapter. Place the top of the device into the cradle, and then push the base into the expandable arms at the bottom of the holder. The arms will then snap into place when the device is completely secured in the cradle. The cradle allows all cables (NOT INCLUDED) to stay connected and controls to be operated while the device is in the cradle. 
  • Additional Cradle/ Holders/ Aqua Box: Click here to see additional cradles that can be purchased for the RAM-B-174 series including: Apple, cell, GPS and water resistant Aqua Boxes with soft touch flex lens.
  • OPTIONAL ACCESSORIES: See the Product Options tab above including self leveling cup holders, water resistant Aqua Boxes with soft touch flex lens, screen magnifiers, locking knobs, video camera adapters and more! 
Popular options compatible with the RAM-B-174 series.
 
Alternative Mounts that fit the iPhone 5 WITH or WITHOUT a Case  or Sleeve:
Click here, to view X-Grip cradle for the Apple iPhone 5, 5S
Click here, to view Top Clamping cradle for Apple iPhone 5, 5S
Click here, to view Finger Gripping holder for Apple iPhone 5, 5S
Click here, to view AQUA-BOX Pro Water Resistant Case for the iPhone 5, 5S

ACCESSORIES FOR THIS PRODUCT...
Double Socket LONG Length Sized Arm for 1 Inch Ball (6.0 Inches Overall Length) Double Socket Arm Keyed Lock for RAM-B-201 Series with 1/4"-20 Brass Hole 1/4"-20 Male Aluminum Camera Stud with 1 Inch Rubber Ball CHROME Brake/Clutch Assembly Mount Base with Standard Sized Length Arm and Diamond Plate
Price $27.49

Add
Price $29.49

Add
Price $10.99

Add
Price $134.99

Add
Double Socket LONG Length Sized Arm for 1 Inch Ball (6.0 Inches Overall Length) Double Socket Arm Keyed Lock for RAM-B-201 Series with 1/4"-20 Brass Hole 1/4"-20 Male Aluminum Camera Stud with 1 Inch Rubber Ball CHROME Brake/Clutch Assembly Mount Base with Standard Sized Length Arm and Diamond Plate
Double Socket SHORT Length Sized Arm for 1 Inch Ball (2.38 Inches Overall Length) Universal 2.5 Inch Round Aluminum Plate with 1 Inch Rubber Ball and 1/4"-20 Male Aluminum Camera Stud
Price $16.99

Add
Price $14.99

Add
Double Socket SHORT Length Sized Arm for 1 Inch Ball (2.38 Inches Overall Length) Universal 2.5 Inch Round Aluminum Plate with 1 Inch Rubber Ball and 1/4"-20 Male Aluminum Camera Stud


Browse for more products in the same category as this item:

Apple Assemblies with Cradle > iPhone Assemblies > iPhone 5, 5S Assemblies