The Mount Depot

RAM-B-174U Includes the Following:

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty
• Base: RAM-B-309-1U black powder coated motorcycle brake/clutch assembly base with 1 inch ball.
  
• Arm: RAM-B-201U standard length arm for 1 inch balls. The arm measures 3 inches between socket centers. Black powder coated marine grade aluminum with plastic twist knob. A shorter arm, 1.75 inches from socket center to socket center, is available.  Please see the RAM-B-201U-A.
• Adapter: RAM-B-238U black powder coated marine grade aluminum universal diamond plate.  Two holes measuring 1.9 inches from center to center.
• Holder: Optional
  

RAM-B-309-1U Description: Black powder coated marine grade aluminum handlebar brake/clutch assembly base with 1 inch rubber ball.  This base is part of the RAM-B-309 family and can attach to either the left or right side of the handlebar assembly.  The base fits the brake/clutch housing assembly on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. The two holes centers in the base have a minimum width of 0.94 inches and a maximum of 1.58 inches and can be viewed in the PDF design drawing by clicking here.

RAM-B-309-1U Options: Attach an extra ball to the RAM-B-309-1 base with the RAM-B-309-3U shown below. This ball can be used to mount additional accessories such as a self leveling cup holder or other electronic devices. 

 

RAM-B-201U Description: Standard length powder coated marine grade aluminum dual socket arm that measures 3.0 inches long from socket center to socket center and 3.69 inches in total length. This arm allows a 1 inch diameter ball accessory to be connected at either end. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory.  This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.

RAM-B-201U Option: See RAM-KNOB3LU keyed lock below.

RAM-B-238U Description: The universal diamond plate is a powder coated marine grade aluminum plate that measures 1.25 inches * 2.5 inches.  This diamond plate connects to a 1 inch diameter rubber ball.  The diamond plate has two holes positioned 1.9 inches from center to center. The hole pattern found on the diamond plate will connect to a large variety of third party cradles and mounts (including RAM holders RAM-HOL-xxxx) and including those with the industry standard AMPS hole pattern. 

RAM-B-238U Option: See RAP-326 Quick Release Adapter below.

Apple, Cell Phone, GPS and Universal Cradle Options:

Select another holder for Apple, cell phones and GPS systems by clicking here.

 

Security and Portability Options:

The RAP-326 quick release adapter allows the cradle to be easily removed if sharing the electronic device between applications (i.e. motorcycle to automobile).  The RAM-KNOB-3LU is a popular option. A keyed twist lock  knob replaces the twist knob on the RAM-B-201 series arm.

Screen Magnification Options:

The RAM-MAG-1U is a screen magnifier that is 2 inches by 4 inches with a 2x zoom. 

Waterproof Aqua Boxes and Cup Holder Options:

Other popular options include waterproof aqua boxes and a self leveling cup holder.

Please click on the above parts for more detailed information. 

RAM-B-174U shown above. Note bottom picture shows optional second RAM-B-309-3U ball that can be used as an additional mounting point.

Picture shown with optional WATERPROOF AQUA BOX holder above. Consider a Waterproof Aqua Box for foul weather conditions.  The RAM Mounts cradle/holder (i.e. RAM-HOL-xxxx) is not required if a waterproof aqua box is used.