NOTE: As
the manufacturer adds new units/models to the above series this cradle
may fit additional models not listed above. Please call 224-578-9162
or complete the product inquiry form by clicking here.
RAM-B-149Z-GA28U
Includes the Following:
- Warranty: Manufacturer's, RAM Mounts (National
Products Inc.), Limited Life Time Warranty
- Base: RAM-B-231ZU black powder coated motorcycle handlebar or universal rail base with zinc coated u-bolt for 3/4 inch to 1 inch diameter rail. For a stainless steel u-bolt please see the RAM-B-149U. See RAM-B-231ZU description below for additional u-bolt options.
- Arm: RAM-B-201U standard
length arm for 1 inch balls. The arm measures 3 inches between
socket centers. Black powder coated marine grade aluminum with plastic
twist knob. A shorter arm, 1.75 inches from socket center to socket center, is available. Please see the RAM-B-149ZAU.
- Adapter: RAM-B-238U black powder coated marine grade
aluminum universal diamond plate. Two holes measuring 1.9 inches
from center to center.
- Cradle: RAM-HOL-GA28U high strength plastic holder. Place the top
of the GPS unit into the cradle, and then push the base into the expandable
arms at the bottom of the holder. The arms will then snap into place when
the GPS is completely secured in the cradle. The cradle allows all cables
(not included) to stay connected while the GPS unit is in the cradle.
RAM-B-231ZU Description: Black powder coated motorcycle handlebar or universal rail base with zinc coated u-bolt for 3/4 inch to 1 inch diameter rail. For smaller diameters the optional RAP-319 is available. The RAP-319 allows a diameter to 1/2 inch. For larger diameters up to 1.25 inches the optional stainless steel u-bolt RAM-SU2512U is available. A stainless steel u-bolt is available that will accommodate a diameter up to 1 inch. Please see the the RAM-HAR-SU251.
RAM-B-201U Description: Standard
length powder coated marine grade aluminum dual socket arm that measures 3.0
inches long from socket center to socket center and 3.69 inches in total
length. This arm allows a 1 inch diameter ball accessory to be connected at
either end. A tightening knob on the side of the arm enables the sockets to
clamp firmly to the attached accessories. The arm allows for easy adjustment by
loosening the side knob, a single spring inside the arm opens the sockets,
allowing the arm to pivot on the attached accessory. This enables the arm
and accessories to be positioned at various angles allowing the ultimate in
position flexibility. Loosen the knob completely and the arm will disconnect
from the accessories.
RAM-B-201U Option: See RAM-KNOB3LU keyed lock below.
RAM-B-238U Description: The
universal diamond plate is a powder coated marine grade aluminum plate
that measures 1.25 inches * 2.5 inches. This diamond plate connects to a
1 inch diameter rubber ball. The diamond plate has two holes positioned
1.9 inches from center to center. The hole pattern found on the diamond plate
will connect to a large variety of third party cradles and mounts (including
RAM holders RAM-HOL-xxxx) and including those with the industry standard AMPS
hole pattern.
RAM-B-238U Option: See RAP-326 Quick Release Adapter below.
Apple, Cell
Phone, GPS and Universal Cradle Options:
Select another holder for
Apple, cell phones and GPS systems by clicking here.
Security and
Portability Options:
The RAP-326 quick release adapter allows
the cradle to be easily removed if sharing the electronic device between
applications (i.e. motorcycle to automobile). The RAM-KNOB-3LU is a popular option. A keyed twist lock knob replaces the twist knob on the RAM-B-201 series arm.
Screen
Magnification Options:
The RAM-MAG-1U is a screen magnifier that is 2
inches by 4 inches with a 2x zoom.
Waterproof Aqua
Boxes and Cup Holder Options:
Other popular
options include waterproof aqua boxes
and a self leveling cup holder.
Please click on the above parts for
more detailed information.
RAM-B-149Z-GA2U shown above.
Picture shown with optional WATERPROOF AQUA BOX holder above. Consider a Waterproof Aqua Box for foul weather conditions. The RAM Mounts cradle/holder (i.e. RAM-HOL-xxxx) is not required if a waterproof aqua box is used. 
