RAM-B-149Z-UN4
Includes the Following:
- Warranty: Manufacturer's, RAM Mounts (National
Products Inc.), Limited Life Time Warranty
- Base: RAM-B-231ZU black powder coated motorcycle handlebar or universal rail base with zinc coated u-bolt for .5 inch to 1.25 inch diameter rail. For a stainless steel u-bolt please see the RAM-B-149U. See RAM-B-231ZU description below for additional u-bolt options.
- Arm: RAM-B-201U standard
length arm for 1 inch balls. The arm measures 3 inches between
socket centers. Black powder coated marine grade aluminum with plastic
twist knob. A shorter arm RAM-B-201U-A, 1.75 inches from socket center to socket center, is available. Please see RAM-B-149ZAU for the complete assembly. A longer arm RAM-B-201U-C, 5.25 inches from socket center to socket center is available.
- Adapter: RAM-B-238U black powder coated marine grade
aluminum universal diamond plate. Two holes measuring 1.9 inches
from center to center.
- Holder: RAM-HOL-UN4U high strength plastic universal electronics device finger grip holder for small to medium devices. See below for device dimensions this holder will accommodate.
RAM-B-231ZU Description: Black powder coated motorcycle handlebar or universal rail base with zinc coated u-bolt for .5 inch to 1.25 inch diameter rail. A plastic adapter the RAP-319 is included to accommodate rail diameters to .5 inch.
RAM-B-231ZU Options: The RAM-B-231 series is available in CHROME RAM-B-231CHU (see picture below). Two optional stainless steel u-bolts are available: RAM-SU2512U to accommodate 1.0 inch to 1.25 inch rail diameter, and the RAM-HAR-SU251 to accommodate up to 1.0 inch rail diameter.
RAM-B-201U Description: Standard
length powder coated marine grade aluminum dual socket arm that measures 3.0
inches long from socket center to socket center and 3.69 inches in total
length. This arm allows a 1 inch diameter ball accessory to be connected at
either end. A tightening knob on the side of the arm enables the sockets to
clamp firmly to the attached accessories. The arm allows for easy adjustment by
loosening the side knob, a single spring inside the arm opens the sockets,
allowing the arm to pivot on the attached accessory. This enables the arm
and accessories to be positioned at various angles allowing the ultimate in
position flexibility. Loosen the knob completely and the arm will disconnect
from the accessories.
RAM-B-201U Options: The RAM-B-201 series is available in CHROME RAM-B-201CHU (see picture below). The RAM-KNOB3LU keyed lock is available and replaces the twist knob found on the RAM-B-201 series arm (see picture below).
RAM-B-238U Description: The
universal diamond plate is a powder coated marine grade aluminum plate
that measures 1.25 inches * 2.5 inches. This diamond plate connects to a
1 inch diameter rubber ball. The diamond plate has two holes positioned
1.9 inches from center to center. The hole pattern found on the diamond plate
will connect to a large variety of third party cradles and mounts (including
RAM holders RAM-HOL-xxxx) and including those with the industry standard AMPS
hole pattern.
RAM-B-238U Options: The RAM-B-238 is available in CHROME RAM-B-238CHU (see picture below). See RAP-326 quick release adapter to allow fast and easy portability between shared mounting applications. This allows the cradle to be easily disconnected from the RAM-B-238 without tools.
RAM-HOL-UN4 Description: Universal plastic finger grip holder is designed to hold a large
amount of different kinds of cell phones (Blackberry and iPhone, etc.)
and electronic devices such as GPS (Garmin eTrex, nuvi), MP3
players and tollway responders. This is a popular holder for ATVs and motorcycles. The
RAM-HOL-UN4
has four rubber coated finger placed along the side of the holder that
grips any electrical device you need to hold. The bottom of the holder
has a plate that
provides additional support to the electronic device being held. The holder has multiple size arms that come with the standard.
NOTE: Below
are the dimensions the holder will accommodate when using the different
size arms (i.e. short, medium or large) that come with the holder.
RAM-HOL-UN4 Cradle Height Dimensions:
Minimum with Top and Bottom Plates: 5.25'' *
Maximum with Top and Bottom Plates: 6.0'' *
* The top and bottom plates can be removed for larger devices.
Spine Plate Dimensions: 2.5W x 5.0H''
Using Short Arm Side Clamps Maximum Depth: 0.75''
Minimum Width: 1.25''
Maximum Width: 3.0''
Using Medium Arm Side Clamps
Maximum Depth: 1.25''
Minimum Width: 1.5''
Maximum Width: 3.5''
Using Long Arm Side Clamps
Maximum Depth: 1.6''
Minimum Width: 2.25''
Maximum Width: 3.5''
Apple, Cell
Phone, GPS and Universal Cradle Options:
Select another holder for
Apple, cell phones and GPS systems by clicking here.
Security and
Portability Options:
The RAP-326 quick release adapter allows
the cradle to be easily removed if sharing the electronic device between
applications (i.e. motorcycle to automobile). The RAM-KNOB-3LU is a popular option. A keyed twist lock knob replaces the twist knob on the RAM-B-201 series arm.
Screen
Magnification Options:
The RAM-MAG-1U is a screen magnifier that is 2
inches by 4 inches with a 2x zoom.
Waterproof Aqua
Boxes and Cup Holder Options:
Other popular
options include waterproof aqua boxes
and a self leveling cup holder.
Please click on the above parts for
more detailed information.
RAM-B-149Z-UN4U shown above.
Picture shown with optional WATERPROOF AQUA BOX holder above. Consider a Waterproof Aqua Box for foul weather conditions. The RAM Mounts cradle/holder (i.e. RAM-HOL-xxxx) is not required if a waterproof aqua box is used. 
