Home > Motorcycle Mounts > Apple Motorcycle Assemblies and Cradles > Apple Assemblies with Cradle >

  Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Std. Sized Length Arm & RAM-HOL-TAB-LGU LARGE Universal Tablet Cradle fits MOST 10" Screens WITH or WITHOUT Case/Cover/Skin Including: Apple iPads / HD, Lenovo LePad, XOOM, LG G-Slate, Galaxy, etc.



 
Alternative Views:
Price $55.25


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAM-B-149Z-TAB-LGU
Qty:

DESCRIPTION TECHNICAL SPECS PRODUCT OPTIONS
 
The RAM-B-149Z-TAB-LGU is a marine grade aluminum handlebar or rail mount base with a ZINC u-bolt, standard sized length arm, diamond adapter plate and RAM-HOL-TAB-LGU universal LARGE tablet cradle holder. The RAM-HOL-TAB-LGU is a high strength composite spring loaded, quick release cradle with two sets of interchangeable cup ends, designed to fit MOST 10 inch screen tablets.

This table cradle is compatible, see full specs below, with the following devices:
  • Apple iPad & iPad 2
  • Asus EEE Pad
  • Asus Eee Pad Transformer
  • HP TouchPad
  • Lenovo LePad Slate
  • LG G-Slate
  • LG Optimus Pad
  • Motorola XOOM
  • Pandigital R90A200
  • Most 10 inch screen tablets that maintain the dimensions below:
    • Height: 8.5" minimum to 10.75" maximum
    • Width: Maximum to 7.75"
    • Edge Depth: Maximum to 0.56"
NOTE: As the manufacturer adds new units/models to the above series this cradle may fit additional models not listed above. Click here for the most current model information on the RAM-HOL-TAB-LGU. Contact or email us by clicking here.

NOTE: It's VERY IMPORTANT to verify the dimensions of your tablet with or without a sleeve/case when determining the overall size.


RAM-B-149Z-TAB-LGU shown above. Electronic device not included.

RAM-B-149Z-TAB-LGU Manufacturer Included Features:
NOTE: Manufacturer features can change without notice. Please visit the manufacturer's website for the latest product information. 
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Dimensions: Click on Technical Specs above to view dimensions.
  • Click on individual links to view more information.
  • Included Base: RAM-B-231ZU black powder coated marine grade aluminum motorcycle handlebar or universal rail base with 1 inch diameter rubber ball.
    • Fits rail diameter from .5 to 1.25 inches.
    • Includes 1 inch zinc u-bolt that fits rail diameter from .75 to 1 inch.
    • Includes 1.25 inch zinc u-bolt that fits rail diameter up to 1.25 inches.
    • Includes two nuts, u-bolt plastic caps and the RAP-319 composite reducer that allows a rail diameter down to .5 inch when used with the 1 inch zinc u-bolt.
  • Optional Stainless Steel U-bolts:
    • RAM-HAR-SU2511.0 inch stainless steel u-bolt, is available. 
    • RAM-SU2512U 1.25 inch stainless steel u-bolt, is available. 
  • Included Arm: RAM-B-201U black powder coated marine grade aluminum standard sized length arm for 1 inch balls.
    • Measures 2.875 inches between socket centers.
    • Measures 3.6875 inches in overall total length.
    • The arm allows for easy adjustment by loosening the plastic side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached base accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.
    • Optional Arms:
      • RAM-B-201U-C, 5.25 inches from socket center to socket center is available.
  • Included Adapter: RAM-B-238U black powder coated marine grade aluminum universal diamond shaped plate with attached 1 inch diameter rubber ball.
    • Compatible with AMPS hole pattern. The adapter will connect to RAM cradles (RAM-HOL-xxxx series) and third party cradles with the AMPS hole pattern.
  • Cradle Material: Black high strength composite. 
  • Cradle Hole Pattern: The back of the cradle has two pre-drilled holes compatible with the AMPS hole pattern (1.912 inches from center hole to center hole). 
  1. Support cups contain open slots to accommodate for devices with or without bumpers/cases sleeves.
  2. Back plate can support various size support cups.
  3. Spring loaded tension provides secure support of device.
  4. Spring loaded cradle allows for quick release of device.
  5. The cradle allows all cables (NOT INCLUDED) to stay connected and all buttons/ports remain accessible.
  • Cradle Dimensions with Large Cup Ends:
    • Height: 8.5" minimum to 10.75" maximum
    • Width: Maximum to 7.75"
    • Edge Depth: Maximum to 0.56"
  • Cradle Dimensions with Small Cup Ends:
    • Height: 8.25" minimum to 10.75" maximum
    • Width: Maximum to 6.8"
    • Edge Depth: Maximum to 0.50"
  • Included with Cradle:
    • (1) Spring loaded back plate
    • (2) Support cups for thin tablets
    • (2) Support cups for wide tablets
  • Manufacturer's Cradle Description: Get the most out of your tablet with the Universal Tab-Tite cradle. With 2 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications.
Instructions
  • Click here to view installation instructions for the RAM-B-149 and RAM-B-231 series.

Accessories for this product...
RAM-B-201U-C RAM-KNOB3LU RAM-B-231CHU RAM-B-238U
Price $17.95
Add
Price $17.55
Add
Price $28.00
Add
Price $5.80
Add
RAM-B-201CHU RAM-B-202U
Price $43.35
Add
Price $6.55
Add


Browse for more products in the same category as this item:

Motorcycle Mounts > Apple Motorcycle Assemblies and Cradles > Apple Assemblies with Cradle
Apple Motorcycle Complete Assemblies
Motorcycle Mounts > Apple Motorcycle Assemblies and Cradles > Apple Assemblies with Cradle > iPad Assemblies > iPad (1st Gen) Assemblies
Motorcycle Mounts > Apple Motorcycle Assemblies and Cradles > Apple Assemblies with Cradle > iPad Assemblies > iPad 2 (2nd Gen) Assemblies


Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Standard Sized Length Arm and RAM-HOL-TAB3U Universal Cradle for Tablets WITH or WITHOUT Case/Cover/Skin Including: Apple iPad 3, iPad HD, iPad 2, iPad $49.20
Handlebar Mount with ZINC U-Bolt (Fits .5 to 1.25 Dia.), Standard Sized Length Arm (No Diamond Plate) $19.65
Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Standard Sized Length Arm & 2.5 Inch Dia. Plate with 1/4"-20 Male Aluminum Camera Stud $28.55
Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Standard Sized Length LOCKING Arm and RAM-HOL-AP8LU LOCKING Holder for Apple iPad 3, iPad HD, iPad 2, iPad WITHOUT Case or Cover $93.95
Handlebar Mount with STAINLESS STEEL 1 Inch U-Bolt, Standard Sized Length Arm & Diamond Adapter Plate $27.55
Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Standard Sized Length Arm and Apple RAM-HOL-AP10U Holder (iPod Touch 4th Gen WITHOUT Case or Cover) $31.85
Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Standard Sized Length Arm and RAM-B-347U Rectangular AMPS Mounting Plate for Zumo $27.25
Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Standard Sized Length Arm & 1 Inch Ball with 1/4"-20 Male Aluminum Camera Stud $27.15
2.5 Inch Round Base with Standard Arm and 1 Inch Ball with Venom Camera Adapter $22.60