Home > Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies with Universal Holder (Smartphone & Small Electronic Devices) >

  Flat Surface Mount with RAM-HOL-UN4U Univ. Finger Gripping Cradle (Fits Device Width 1.25" to 3.5" Including GPS, eTrex, 2 Way Radios, Smartphones with Cover/Case iPhone, Droid, etc.)
 
 
Price $40.50


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAM-B-138-UN4U
Qty:

DESCRIPTION TECHNICAL SPECS PRODUCT OPTIONS
 
The RAM-B-138-UN4U is a flat surface marine grade aluminum mount that has a 2.5 inch diameter flat surface base with pre-drilled holes, standard sized length arm, universal diamond adapter plate with universal electronic device finger gripping cradle (RAM-HOL-UN4U).
 
Below are the dimensions the RAM-HOL-UN4U cradle will accommodate:

NOTE: The RAM-HOL-UN4U includes 3 sets of different sized length arms.

RAM-HOL-UN4U Cradle Height Dimensions:
Minimum Height with Top and Bottom Plates: 5.25'' *
Maximum Height with Top and Bottom Plates: 6.0'' *
* The top and bottom plates can be removed for larger devices.

Spine/Back Plate Dimensions: 2.5W x 5.0H''

Using Short Arm Side Clamps:
Maximum Depth: 0.75''
Minimum Width: 1.25''
Maximum Width: 3.0''

Using Medium Arm Side Clamps:
Maximum Depth: 1.25''
Minimum Width: 1.5''
Maximum Width: 3.5''

Using Long Arm Side Clamps:
Maximum Depth: 1.6''
Minimum Width: 2.25''
Maximum Width: 3.5''
 
NOTE: Please call 224-578-9162 or complete the product inquiry form by clicking here.


RAM-B-138-UN4U shown above.

RAM-B-138-UN4U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black power coated marine grade aluminum. Chrome is also available.
  • Socket Ball Size: B-Ball Size = 1.0 inch ball. Max Weight 5 lbs.
  • Overall Length: Please click here or on Technical Specs above to see the overall length dimensions.
  • Base: RAM-B-202U 2.5 inch diameter base with pre-drilled holes and 1 inch diameter rubber ball. The pre-drilled holes accommodate the AMPS hole pattern. Mounting hardware is NOT INCLUDED.
  • Arm: RAM-B-201U standard sized length arm for 1 inch balls. The arm measures 2.875 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction.
    • A shorter arm RAM-B-201U-A, 1.75 inches from socket center to socket center, is available. Please see RAM-B-138U-A for the complete assembly.
    • A longer arm RAM-B-201U-C, 5.25 inches from socket center to socket center is available. Please see RAM-B-138U-C for the complete assembly.
    • NOTE: The holder is not included in either the RAM-B-138U-A or RAM-B-138U-C.
  • Adapter: RAM-B-238U black marine grade aluminum universal diamond plate with two holes measuring 1.9 inches from hole center to hole center will accommodate the AMPS hole pattern. This plate includes a 1 inch diameter rubber ball.
  • Holder/Cradle: RAM-HOL-UN4U plastic finger grip cradle is designed to hold a large amount of different kinds of cell phones (Blackberry, Droid, iPhone, smartphones, 2 way radios, etc.) and electronic devices such as GPS (Garmin eTrex, nuvi, etc.) and MP3 players. This is a popular holder for ATVs and motorcycles. The RAM-HOL-UN4U has four rubber coated finger placed along the side of the cradle that grips any electrical device you need to hold. The bottom of the cradle has a plate that provides additional support to the electronic device being held.
  • NOTE: The RAM-HOL-UN4U includes 3 sets of different sized length arms.
  • Options: Please click here or on Product Options above to view popular options including additional cradles for other electronic devices.

RAM-B-201U Detailed Description: Black powder coated marine grade aluminum arm allows a 1 inch diameter ball accessory to be connected at either end. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.

If you require a different sized side clamping cradle there are other options available for electronic devices:
Small Composite Side Clamping Cradle (RAM-HOL-UN1U)

Accessories for this product...
RAM-HOL-UN3U RAM-HOL-UN1U RAM-HOL-UN2U RAM-B-120BU
Price $19.60
Add
Price $19.40
Add
Price $19.40
Add
Price $44.55
Add


Browse for more products in the same category as this item:

Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies with Universal Holder (Smartphone & Small Electronic Devices)
Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies with Cradle (Apple, Garmin, GPS, Tablets, Video Camera, etc.) > Universal (Smartphones, Netbooks, Tablets, etc.)
Cell / Smartphone Mounts > Flat Surface Universal Cell & Smartphone Assemblies
Cell / Smartphone Mounts > Universal Cell & Smartphone Assemblies by Device Width (Fits Width Range from .875" to 3.5") > UN4U Series Assemblies (1.25" to 3.5" Device Width)
Apple Mounts and Cradles > Apple Complete Assemblies with Cradle by Device Type (i.e., iPad, iPhone, iPod, etc.) > iPhone Assemblies with Cradle > All iPhones (UN4U Finger Gripping Cradle) WORKS WITH Case/Cover/Skin


Shipping Insurance $1.65
Universal Horizontal Laptop Mount with Dual Swing Arms $138.95
2.5 Inch Dia. Base with Standard Sized Length Arm and 3.68 Inch Square VESA 75mm Compatible Plate $45.25
ATV/UTV Strap Base with Standard Arm and Self Leveling Cup Holder $38.45
12 Inch Double Swingarm with Swivel Socket Mount with 1.5 Inch Diameter Ball $58.30
Back-Up Mounting Plate with VESA Plate $181.95
ATV/UTV Strap or U-Bolt Base (U-Bolt Fits .5 to 1.25" Dia., Strap Base Fits 1.57 to 3.15" Dia.), Standard Sized Length Arm & Diamond Adapter Plate $32.50
Handlebar or Rail Base 1.0 Inch Diameter Stainless Steel U-Bolt $2.95
Back-Up Mounting Plate with Std Sized Arm and VESA Plate $319.95