Home > Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies with Cradle (Apple, Garmin, GPS, Tablets, Video Camera, etc.) > Apple >

  2.5 Inch Diameter Base and Standard Arm with RAM-HOL-AP5U Apple iPod Nano Holder (3rd Gen WITHOUT Case or Cover)
 
 
Price $27.95


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAM-B-138-AP5U
Qty:

DESCRIPTION TECHNICAL SPECS PRODUCT OPTIONS
 
The RAM-B-138-AP5U is a flat surface marine grade aluminum mount that has a 2.5 inch diameter flat surface base with pre-drilled holes, standard sized arm, universal diamond adapter plate with holder for the following device(s):
  • Apple iPod Nano G3 4GB Video (Generation 3 Only)
  • Apple iPod Nano G3 8GB Video (Generation 3 Only)
NOTE: As the manufacturer adds new units/models to the above series this cradle may fit additional models not listed above. Click here for the most current model information RAM-HOL-AP5U. Please call 224-578-9162 or complete the product inquiry form by clicking here.

RAM-B-138-AP5U shown above.

RAM-B-138-AP5U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black power coated marine grade aluminum. Chrome is also available.
  • Socket Ball Size: B-Ball Size = 1.0 inch ball. Max Weight 5 lbs.
  • Overall Length: Please click here or on Technical Specs above to see the overall length dimensions.
  • Base: RAM-B-202U 2.5 inch diameter base with pre-drilled holes and 1 inch diameter rubber ball. The pre-drilled holes accommodate the AMPS hole pattern. Mounting hardware is NOT INCLUDED.
  • Arm: RAM-B-201U standard length arm for 1 inch balls. The arm measures 2.875 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction.
    • A shorter arm RAM-B-201U-A, 1.75 inches from socket center to socket center, is available. Please see RAM-B-138U-A for the complete assembly.
    • A longer arm RAM-B-201U-C, 5.25 inches from socket center to socket center is available. Please see RAM-B-138U-C for the complete assembly.
    • NOTE: The holder is not included in either the RAM-B-138U-A or RAM-B-138U-C.
  • Adapter: RAM-B-238U black marine grade aluminum universal diamond plate with two holes measuring 1.9 inches from hole center to hole center will accommodate the AMPS hole pattern.This plate includes a 1 inch diameter rubber ball.
  • Holder/Cradle: RAM-HOL-AP5U high strength plastic holder for the 3rd generation Apple iPod Nano. This cradle WILL NOT FIT earlier or later generation iPod Nano models. Place the top of the Apple iPod into the cradle, and then push the base into the expandable arms at the bottom of the holder. The arms will then snap into place when the iPod is completely secured in the cradle. The cradle allows all cables (not included) to stay connected while the iPod unit is in the cradle. Hardware to attach the holder/cradle to the RAM-B-238U is included.
  • Options: Please click here or on Product Options above to view popular options including additional cradles for other electronic devices.

RAM-B-201U Detailed Description: Black powder coated marine grade aluminum arm allows a 1 inch diameter ball accessory to be connected at either end. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.

Accessories for this product...
RAM-202PSAU
Price $4.50
Add


Browse for more products in the same category as this item:

Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies with Cradle (Apple, Garmin, GPS, Tablets, Video Camera, etc.) > Apple
Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Flat Surface RAM-B-138 Assemblies


Brake/Clutch Assembly Mount or U-Bolt Handlebar Mount with Standard Sized Arm and RAM-HOL-AQ3U Small Sized Waterproof Holder $47.75
Flat Surface Mount and RAM-HOL-PD3U Universal Top Clamping Cradle (Fits Device Width 2.25" to 3.5" Including Most Smartphones with Cover/Case iPhone, Droid, etc.) $36.05
Flat Surface Mount with Small Sized Waterproof Aqua Box Holder $46.95
2.5 Inch Round Base with Standard Sized Arm and 1 Inch Ball with 1/4"-20 Male Aluminum Camera Stud $22.65
National Seating Captain's Chair (2006-2011) Laptop Mount System $204.95 + Free Shipping and Laptop Accessory!
Brake/Clutch Assembly CHROME Mount with 1 Inch Ball $28.80
Brake/Clutch Assembly CHROME Mount with Two 1 Inch Balls $36.15
Chevrolet Impala (WITHOUT Power Seats 2006-2009) Laptop Mount System $193.95 + Free Shipping and Laptop Accessory!
Universal Plate .87" * 2.25" with 11 Millimeter Hole with Standard Arm and Self Leveling Cup Holder $38.85