Home > Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies with Cradle (Apple, Garmin, GPS, Tablets, Video Camera, etc.) > Apple >

  2.5 Inch Diameter Base and Standard Arm with Apple RAM-HOL-AP4U Holder (iPod Touch 1st Gen WITHOUT Case or Cover)
 
 
Price $28.95


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAM-B-138-AP4U
Qty:

DESCRIPTION TECHNICAL SPECS PRODUCT OPTIONS
 
The RAM-B-138-AP4U is a flat surface marine grade aluminum mount that has a 2.5 inch diameter flat surface base with pre-drilled holes, standard arm, universal diamond adapter plate and holder for the following device:
  • Apple iTouch holder (1st Generation Only).

NOTE: This cradle WILL NOT FIT later Apple iTouch generation models. Please click here to see other iTouch generation flat surface mounts.

NOTE: Questions, please call 224-578-9162 or complete the product inquiry form by clicking here.


RAM-B-138-AP4U shown above.

RAM-B-138-AP4U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty
  • Color/Material: Black power coated marine grade aluminum. Chrome is available.
  • Socket Ball Size: B-Ball Size = 1.0 inch ball.
  • Base: RAM-B-202U 2.5 inch diameter base with pre-drilled holes and 1 inch diameter rubber ball. The pre-drilled holes accommodate the AMPS hole pattern. Mounting hardware is NOT INCLUDED.
  • Arm: RAM-B-201U standard length arm for 1 inch balls. The arm measures 2.875 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction. A shorter arm RAM-B-201U-A, 1.75 inches from socket center to socket center, is available. Please see RAM-B-138U-A for the complete assembly. A longer arm RAM-B-201U-C, 5.25 inches from socket center to socket center is available. Please see RAM-B-138U-C for the complete assembly. Please note the holder is not included in either the RAM-B-138U-A or RAM-B-138U-C.
  • Adapter: RAM-B-238U black marine grade aluminum universal diamond plate with two holes measuring 1.9 inches from hole center to hole center and accommodate the AMPS hole pattern. This adapter has a 1 inch diameter rubber ball connected to it.
  • Holder/Cradle: RAM-HOL-AP4U high strength plastic holder for the 1st generation Apple iTouch). This cradle WILL NOT FIT later generation iTouch models. Place the top of the Apple iTouch into the cradle, and then push the base into the expandable arms at the bottom of the holder. The arms will then snap into place when the iTouch is completely secured in the cradle. The cradle allows all cables (not included) to stay connected while the iTouch unit is in the cradle. Hardware to attach the holder/cradle to the RAM-B-238U is included.

RAM-B-201U Description: Black powder coated marine grade aluminum arm allows a 1 inch diameter ball accessory to be connected at either end. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.

Accessories for this product...
RAM-202PSAU
Price $4.50
Add


Browse for more products in the same category as this item:

Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies with Cradle (Apple, Garmin, GPS, Tablets, Video Camera, etc.) > Apple
Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Flat Surface RAM-B-138 Assemblies


Rail Easy Mount Strap Base (Road and Mountain Bicycles) with Swivel Feature and RAM-HOL-AP6U Apple iPhone Holder (2nd & 3rd Gen 3G/3GS WITHOUT Case or Cover) $15.05
Dodge Ram 1500 (1994-2001) and 2500, 3500 (1994-2002) Laptop Mount System $241.95 + Free Shipping and Laptop Accessory!
Single 3.25" Dia. Suction Cup Base with Twist Lock, Aluminum Standard Length Sized Arm and Apple RAM-HOL-AP7U Holder (iPod Touch 2nd & 3rd Gen WITHOUT Case or Cover) $38.25
Brake/Clutch Assembly Mount or U-Bolt Handlebar Mount with Standard Sized Arm and Apple RAM-HOL-AP4U Holder (iPod Touch 1st Gen WITHOUT Case or Cover) $33.75
Single 3.25" Dia. Suction Cup Base with Twist Lock, Aluminum Standard Length Sized Arm and RAM-HOL-AQ6U Medium Wide Size WATEPROOF Holder $75.50
Dual 3.25" Dia. Suction Cup Base with Twist Lock and Mouning Plate (Heavy Duty) $22.80
Brake/Clutch Assembly Mount or U-Bolt Handlebar Mount with Standard Sized Arm and Self Leveling Cup Holder $35.25
Ford Focus (2003-2010) Laptop Mount System $195.95 + Free Shipping and Laptop Accessory!
Flat Surface Mount with RAM-HOL-UN3U Large Holder (Fits Device Width 2.32" to 3.37") Fits Most Smartphones with Cover/Case iPhone, Droid, etc. $39.80