The RAM-B-126-231Z-2 consists of the following: RAM-B-126KU mirror, RAM-B-201U arm and RAM-B-231Z-2 base.
RAM-B-126KU: The RAM-B-126KU is a convex rear mirror 7 inches high * 14 inches long. The back of the mirror includes a 1 inch mounting ball that connects to the RAM-B-201U.
RAM-B-201U: The
RAM-B-201U double socket arm for 1 inch balls is the standard 3.0 inch
double socket arm. The RAM-B-201U has a socket at either end to allow a
1 inch diameter ball accessories to be connected. A tightening screw on
the side of the arm enables the sockets to clamp firmly to a RAM 1 inch
diameter ball. When loosening the side screw, a single spring inside
the arm opens the sockets allowing you to pivot the ball and socket
connection or completely disconnect the ball from the socket. The arm
length is 3.0 inches when measured from socket center to socket center.
The total length of the arm is 3.69 inches.
RAM-B-231Z-2: The RAM-B-231Z-2
is a marine grade aluminum strap clamp base has a 1.0 inch diameter
rubber ball. The strap base tightening screw
is encased in a compact housing for a clean and safe finish. The strap
is
long enough to wrap around handlebar posts found on most ATV's, UTV's,
snowmobiles, motorcycles and other hard to mount applications.
RAM-B-231Z-2 Strap Dimensions:
1.57 inch(40mm) to a maximum of 3.15 inch(80mm). The strap will accommodate a 2.5 inch diameter handlebar/rail.
 |
