Home > Apple Mounts and Cradles > Apple Complete Assemblies with Cradle by Device Type (i.e., iPad, iPhone, iPod, etc.) > iPhone Assemblies with Cradle > All iPhones (UN7 X Gripping Cradle) WORKS WITH Case/Cover/Skin* >

  Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) with Standard Sized Arm & RAM-HOL-UN7BU Universal X Grip Spring Loaded Holder (Fits Device Width .875" to 3.25") for iPhone, etc



 
Alternative Views:
Price $59.65


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAM-B-121-UN7U
Qty:

DESCRIPTION
 
The RAM-B-121-UN7U is a marine grade aluminum yoke mount that consists of yoke clamp mount base, standard sized length arm and universal X gripping cradle. This holder will accommodate electronic devices (such as the iPhone, Droid, smartphones with a thin case or skin) within the following dimensions:
  • Minimum Width = 0.875"
  • NOTE: Devices at 0.875" must be a minimum of 4" in height to fit into holder
  • Maximum Width = 3.25"
  • Depth = 0.875"
This holder is compatible, but not limited, to the following cases/skins/bumpers:

NOTE: Questions? Contact us by clicking here.

RAM-B-121-UN7U shown above. 

RAM-B-121-UN7U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black powder coated marine grade aluminum. 
  • Socket Ball Size: B-Ball Size = 1.0 inch Ball. Maximum suggested weight 5 lbs.
  • Yoke Base: RAM-B-121BU aluminum yoke clamp mount base fits a rail diameter from 5/8 inch to a maximum of 1.25 inches. The 1 inch rubber ball sits at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the yoke clamps around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails. The rail does not need to be perfectly round to use this base.
  • Arm: RAM-B-201U standard sized length arm for 1 inch balls. The arm measures 3.0 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction.
  • Holder RAM-HOL-UN7BU:
    • Spring loaded holder expands and contracts for perfect fit of your device.
    • 1 inch rubber diameter rubber ball is attached to the cradle.
    • Rubber coated tips will hold device firm and stable.
    • Versatility of holder allows for attachment to many RAM-to-RAM ball mounts.
    • Single socket technology allows for multiple adjustment angles and articulation of device.
  • Manufacturer's Cradle Description: Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.

RAM-HOL-UN7BU cradle shown above.


Browse for more products in the same category as this item:

Apple Mounts and Cradles > Apple Complete Assemblies with Cradle by Device Type (i.e., iPad, iPhone, iPod, etc.) > iPhone Assemblies with Cradle > All iPhones (UN7 X Gripping Cradle) WORKS WITH Case/Cover/Skin*
Cell / Smartphone Mounts > Universal Cell & Smartphone Assemblies by Device Width (Fits Width Range from .875" to 3.5") > UN7 Series Assemblies (.875" to 3.25" Device Width)
Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Yoke Mount Assemblies (Fits .5" to 2.58" Rail Diameter) > Aluminum Yoke Assemblies RAM-B-121 Series Assemblies (Fits 0.625" to 1.25" Rail Diameter) > Apple Assemblies
Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Yoke Mount Assemblies (Fits .5" to 2.58" Rail Diameter) > Aluminum Yoke Assemblies RAM-B-121 Series Assemblies (Fits 0.625" to 1.25" Rail Diameter) > Universal (iPhone, Smartphone, Netbook, Tablet, etc.) Assemblies
Cell / Smartphone Mounts > Aviation Universal Cell & Smartphone Assemblies > X Gripping Universal Assemblies


Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) with Standard Sized Arm and 2.5 Inch Dia. Plate with 1/4"-20 Male Aluminum Camera Stud $42.75
Aviation Yoke Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) with Standard Sized Arm and RAM-HOL-AP8U Holder for Apple iPad 3, iPad HD, iPad 2, iPad WITHOUT Case or Cover $63.35
Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) with Standard Sized Length Arm and Universal Round Plate with 1.0 Inch Dia. Rubber Ball $37.55
Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) Marine Grade Aluminum Base with 1.0 Inch Dia. Rubber Ball $22.35
Handlebar Mount with Stainless Steel U-Bolt (Fits 1.0 Dia.), Standard Sized Length Arm & RAM-B-120BU Universal Metal Holder $66.95
Diamond Shaped Base Plate with 1" Dia. Rubber Ball, STANDARD Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes $27.30
2.5" Dia. Base with 1" Dia. Rubber Ball, LONG Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes $37.95
Rail Mount with Stainless Steel U-Bolt (Fits 1.0" Rail Diameter), STANDARD Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes $37.75
V Base Strap Base, Standard Sized Length Arm and 2.5 Inch Dia. Plate with 1/4"-20 Male Aluminum Camera Stud (Fits 1 Inch to 2.1 Inch Rail Diameter) $36.75