The RAM-B-120-YK1 is a marine grade aluminum yoke mount that consists of the a yoke clamp mount base, standard arm and large sized electronics device holder.
RAM-B-120-YK1 shown above.
RAM-B-120-YK1 Includes the Following:
- Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
- Color/Material: Black power coated marine grade aluminum. Chrome is available.
- Socket Ball Size: B-Ball Size = 1.0 inch Ball. Maximum suggested weight 5 lbs.
- Yoke Base: RAM-B-121BU aluminum yoke clamp mount base fits a rail diameter from 5/8 inch to a maximum of 1.25 inches. The 1 inch rubber ball sits at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the yoke clamps around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails. The rail does not need to be perfectly round to use this base.
-
Arm: RAM-B-201U standard length arm for 1 inch balls. The arm measures 2.875 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction.
Cradle Description: RAM-B-120B marine grade aluminum side clamping cradle designed to hold large sized electronic devices. This cradle has padded locking side clamps that close tightly on the item you want to secure. To release the side clamp hold simply press the button, found at the bottom left side of the cradle, which then allows the side clamps open. At the base of the cradle is additional support to hold the bottom of the device securely in the cradle.
RAM-B-120B Cradle Dimensions Below:
-
Minimum Width: 1.5'' (with foam), 2.43'' (without foam)
-
Maximum Width: 3.5'' (with foam), 4.5'' (without foam)
-
Clamp Height: 2.62''
-
Cradle Height: 6.5''
-
Clamp Depth: 1.38''
NOTE: The top of the cradle is open. This allows secured devices to be larger then the height of the actual cradle.
- Cradle/Holders/Aqua Box:
Optional. Select a holder for Apple, cell phones, GPS systems and electronic devices by clicking here
RAM-B-201U Description: Black powder coated marine grade aluminum arm allows a 1 inch diameter ball accessory to be connected at either end. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.
