Home > RAM Assemblies & Parts > B Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > 1.0" B Ball Assemblies > Flat Surface Assemblies >

  Diamond Shaped Base Plate with 1" Dia. Rubber Ball, STANDARD Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes



 
Price $27.30



AVAILABILITY: Ships within 24 Hours
Product Code: RAM-B-111-238U
Qty:

DESCRIPTION TECHNICAL SPECS PRODUCT OPTIONS
 
The RAM-B-111-238U is a 6.25 inch by 2 inch rectangular marine grade aluminum mounting plate, universal diamond shaped base plate with 1 inch diameter rubber ball and standard sized length arm. The mounting plate can be used for many electronic devices including: CB Radios, HAM Radios, and Marine Electronics. 


RAM-B-111-238U shown above.  Mounting hardware is not included.

NOTE: Scroll down to the bottom of the page for a list of marine device this universal plate will accommodate.

RAM-B-111-238U Features and Options:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Material: Black powder coated marine grade aluminum with plastic twist knob and two 1 inch diameter rubber balls.
  • NOTE: This marine grade aluminum plate can also be drilled into for a custom hole pattern without voiding the manufacturer's warranty.
  • Mounting Plate Dimensions: 6.25 inches * 2 inches with 1.0 inch diameter "B" sized rubber ball. 
  • Socket Ball Size: Connects to 1.0 inch B Ball Size / Max. Weight 5 lbs.
  • Plate Description: RAM-B-111BU has many different combination of pre-drilled holes which will match many electronic devices including: CB Radios, Ham Radios, Marine GPS and other devices.  
   

  • Base Plate Included: RAM-B-238U shown below is a marine grade aluminum universal diamond shaped plate with a 1.0 inch diameter "B" sized rubber ball. The plate has pre-drilled holes 1.9 inches from center hole to center hole.
    
  • Arm Included: RAM-B-201U shown below is a standard length marine grade aluminum arm 2.875 inches in length from socket center to socket center and 3.6875 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
    
                    
The RAM-B-111-238U will fit the following marine electronic devices:
  • GARMIN FISHFINDER 100, FISHFINDER 100 BLUE
  • GARMIN FISHFINDER 160, FISHFINDER 160 Blue
  • GARMIN FISHFINDER 160C
  • GARMIN FISHFINDER 240, FISHFINDER 240 BLUE
  • GARMIN FISHFINDER 300C
  • GARMIN GPSMAP 162
  • GARMIN GPSMAP 168 SOUNDER
  • Humminbird Matrix 97

NOTE: As the manufacturer adds new models the universal plate may fit additional devices. CLICK HERE to view the latest model information (Adobe required). Please call or e-mail us by CLICKING HERE for additional information.

Accessories for this product...
RAM-114-RBU RAM-114RM RAM-338U RAM-111U
Price $34.25
Add
Price $8.95
Add
Price $10.60
Add
Price $42.30
Add
RAP-340 RAM-B-138-AP5U RAM-KNOB3LU RAM-HOL-AQ6U
Price $20.15
Add
Price $27.95
Add
Price $17.55
Add
Price $40.95
Add
RAP-B-104-224-AP4U
Price $33.15
Add


Browse for more products in the same category as this item:

RAM Assemblies & Parts > B Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > 1.0" B Ball Assemblies > Flat Surface Assemblies
Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies (No Cradle)
Marine / Fishing Mounts > Fish Finder and Chartplotter Assemblies (Eagle, Garmin, Humminbird, Lowrance, Raymarine, etc.) > 1.0" B-Ball Sized Assemblies (5 Pound Max) > RAM-B-111 Series Assemblies


2.5" Dia. Base with 1" Dia. Rubber Ball, LONG Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes $37.95
Rail Mount with Stainless Steel U-Bolt (Fits 1.0" Rail Diameter), STANDARD Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes $37.75
V Base Strap Base, Standard Sized Length Arm and 2.5 Inch Dia. Plate with 1/4"-20 Male Aluminum Camera Stud (Fits 1 Inch to 2.1 Inch Rail Diameter) $36.75
V Strap Base Mount with Standard Sized Length Arm and Extension Plate for Garmin GPSMAP 696 $38.80
V Base Strap Base, Standard Sized Length Arm and Universal Round Plate with 1.0 Inch Dia. Ball (Fits 1 Inch to 2.1 Inch Rail Diameter) $29.65
Marine MOUNTING PLATE with 1.0" Dia. Rubber Ball for Selected Eagle, Humminbird and Lowrance Models $14.75
2.5" Dia. Base with 1" Dia. Rubber Ball, Standard Sized Length Arm and Marine Plate for Specified Humminbird, Lowrance, Raymarine Apelco Models $29.95
Marine MOUNTING PLATE with 1.0" Dia. Rubber Sized Ball for Selected Humminbird, Lowrance, Raymarine Apelco Models $16.05
Tallon Receiver Base with Medium Wide Sized Waterproof Aqua Box Holder $119.50