Home > RAM Assemblies & Parts > B Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > 1.0" B Ball Assemblies > Flat Surface Assemblies >

  2.5" Dia. Base with 1" Dia. Rubber Ball, STANDARD Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes
 
 
Price $27.35


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAM-B-111U
Qty:

DESCRIPTION TECHNICAL SPECS PRODUCT OPTIONS
 
The RAM-B-111U is a 6.25 inch by 2 inch rectangular marine grade aluminum universal mounting plate with a 2.5 inch diameter base with "B" sized 1.0 inch diameter rubber ball and standard sized length arm. The mounting plate can be used for many electronic devices including: CB Radios, HAM Radios, and Marine Electronics. 

RAM-B-111U shown above.  Mounting hardware is not included.

NOTE: Scroll down to the  bottom of the page for a list of marine device this universal plate will accommodate.

RAM-B-111U Features and Options:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Material: Black powder coated marine grade aluminum with plastic twist knob and two 1 inch diameter rubber balls.  
  • NOTE: This marine grade aluminum plate can also be drilled into for a custom hole pattern without voiding the manufacturer's warranty.
  • Mounting Plate Dimensions: 6.25 inches * 2 inches with 1.0 inch diameter "B" sized rubber ball. 
  • Socket Ball Size: Connects to 1.0 inch B Ball Size / Max. Weight 5 lbs.
  • Plate Description: RAM-B-111BU has many different combination of pre-drilled holes which will match many electronic devices including: CB Radios, Ham Radios, Marine GPS and other devices.  
     
  • Base Plate Included: RAM-B-202U shown below is a marine grade aluminum universal 2.5 inch diameter plate with a 1.0 inch diameter "B" sized rubber ball. The plate has pre-drilled holes, including the universal AMPS hole pattern.
    
  • Arm Included: RAM-B-201U shown below is a standard length marine grade aluminum arm 2.875 inches in length from socket center to socket center and 3.6875 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
    
  • Arm Length Options (Not Included):
    • RAM-B-201U-A short "A" length arm 1.75 inches from socket center to socket center, is available. Please see the RAM-111U-B for a complete mounting assembly.
    • RAM-B-201U-C long "C" length arm 5.1875 inches from socket center to socket center is available. Please see the RAM-B-111U-C for a complete mounting assembly.              
The RAM-B-111U will fit the following marine electronic devices:
  • GARMIN FISHFINDER 100, FISHFINDER 100 BLUE
  • GARMIN FISHFINDER 160, FISHFINDER 160 Blue
  • GARMIN FISHFINDER 160C
  • GARMIN FISHFINDER 240, FISHFINDER 240 BLUE
  • GARMIN FISHFINDER 300C
  • GARMIN GPSMAP 162
  • GARMIN GPSMAP 168 SOUNDER
  • Humminbird Matrix 97

NOTE: As the manufacturer adds new models the universal plate may fit additional devices. CLICK HERE to view the latest model information (Adobe required). Please call or e-mail us by CLICKING HERE for additional information.

Accessories for this product...
RAM-114-RBU RAM-114RM RAM-338U RAM-111U
Price $34.25
Add
Price $8.95
Add
Price $10.60
Add
Price $42.30
Add
RAP-340 RAM-HOL-AQ6U RAM-KNOB3LU RAM-B-138-AP5U
Price $20.15
Add
Price $40.95
Add
Price $17.55
Add
Price $27.95
Add
RAP-B-104-224-AP4U
Price $33.15
Add


Browse for more products in the same category as this item:

RAM Assemblies & Parts > B Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > 1.0" B Ball Assemblies > Flat Surface Assemblies
Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies (No Cradle)
Marine / Fishing Mounts > Fish Finder and Chartplotter Assemblies (Eagle, Garmin, Humminbird, Lowrance, Raymarine, etc.) > 1.0" B-Ball Sized Assemblies (5 Pound Max) > RAM-B-111 Series Assemblies


Suction Cup 4.0 Inch Diameter Base with 1 Inch Ball $20.35
Double Socket Standard Length Sized Arm for 2.25 Inch Ball $62.25
Double Socket Standard Length PLASTIC Arm for 1 Inch Ball $9.50
Single 3.25" Dia. Suction Cup Base with Twist Lock, Aluminum Standard Length Sized Arm and Diamond Adapter Plate (Medium Duty) $31.00
1/4"-20 FEMALE Thread with 1 Inch Ball Base $6.75
Square Rail Clamp Base 5 Inch Max Width with 1.5 Inch Ball $61.15
Square Rail Clamp Base 3 Inch Max Width with 1.5 Inch Ball $33.75
12 Inch Pipe with 0.5 Inch NPT Male Thread Ends $8.10
Composite T-Slot Adapter with 1.0 Inch Dia. Ball $7.95