Home > RAM Assemblies & Parts > B Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > 1.0" B Ball Assemblies > Flat Surface Assemblies >

  2.5" Dia. Base with 1" Dia. Rubber Ball, LONG Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes



 
Price $37.95


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAM-B-111U-C
Qty:

DESCRIPTION TECHNICAL SPECS PRODUCT OPTIONS
 
The RAM-B-111U-C is a 6.25 inch by 2 inch rectangular marine grade aluminum universal mounting plate with a 2.5 inch diameter base with 1.0 inch diameter rubber ball and long length sized arm. The mounting plate can be used for many electronic devices including: CB Radios, HAM Radios, and Marine Electronics. 

RAM-B-111U-C shown above. Mounting hardware is not included.

NOTE: Scroll down to the bottom of the page for a list of marine device this universal plate will accommodate.

RAM-B-111U-C Features and Options:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Material: Black powder coated marine grade aluminum with plastic twist knob and two 1 inch diameter rubber balls.
  • NOTE: This marine grade aluminum plate can also be drilled into for a custom hole pattern without voiding the manufacturer's warranty.
  • Mounting Plate Dimensions: 6.25 inches * 2 inches with 1.0 inch diameter rubber "B" sized ball. 
  • Socket Ball Size: Connects to 1.0 inch B Ball Size / Max. Weight 5 lbs.
  • Plate Description: RAM-B-111BU has many different combination of pre-drilled holes which will match many electronic devices including: CB Radios, Ham Radios, Marine GPS and other devices.  
     

  • Base Plate Included: RAM-B-202U shown below is a marine grade aluminum universal 2.5 inch diameter plate with a 1.0 inch diameter rubber "B" sized ball. The plate has pre-drilled holes, including the universal AMPS hole pattern.
     
  • Arm Included: RAM-B-201U-C shown below is a long length marine grade aluminum arm 5.1875 inches in length from socket center to socket center and 6.0 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
    
  • Arm Length Options (Not Included):
    • RAM-B-201U-A short "A" length arm 1.75 inches from socket center to socket center, is available. Please see the RAM-111U-B for a complete mounting assembly.
    • RAM-B-201U standard length arm 2.875 inches from socket center to socket center, is available. Please see the RAM-111U for a complete mounting assembly.

The RAM-B-111U-C will fit the following marine electronic devices:

  • GARMIN FISHFINDER 100, FISHFINDER 100 BLUE
  • GARMIN FISHFINDER 160, FISHFINDER 160 Blue
  • GARMIN FISHFINDER 160C
  • GARMIN FISHFINDER 240, FISHFINDER 240 BLUE
  • GARMIN FISHFINDER 300C
  • GARMIN GPSMAP 162
  • GARMIN GPSMAP 168 SOUNDER
  • Humminbird Matrix 97

NOTE: As the manufacturer adds new models the universal plate may fit additional devices. CLICK HERE to view the latest model information (Adobe required). Please call or e-mail us by CLICKING HERE for additional information.

Accessories for this product...
RAP-340 RAM-B-111U-C RAM-338U RAM-114RM
Price $20.15
Add
Price $37.95
Add
Price $10.60
Add
Price $8.95
Add
RAM-114-RBU RAM-KNOB3LU RAM-B-111U RAM-HOL-AQ6U
Price $34.25
Add
Price $17.55
Add
Price $27.35
Add
Price $40.95
Add


Browse for more products in the same category as this item:

RAM Assemblies & Parts > B Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > 1.0" B Ball Assemblies > Flat Surface Assemblies
Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies (No Cradle)
Marine / Fishing Mounts > Fish Finder and Chartplotter Assemblies (Eagle, Garmin, Humminbird, Lowrance, Raymarine, etc.) > 1.0" B-Ball Sized Assemblies (5 Pound Max) > RAM-B-111 Series Assemblies


Rail Mount with Stainless Steel U-Bolt (Fits 1.0" Rail Diameter), STANDARD Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes $37.75
V Base Strap Base, Standard Sized Length Arm and 2.5 Inch Dia. Plate with 1/4"-20 Male Aluminum Camera Stud (Fits 1 Inch to 2.1 Inch Rail Diameter) $36.75
V Strap Base Mount with Standard Sized Length Arm and Extension Plate for Garmin GPSMAP 696 $38.80
V Base Strap Base, Standard Sized Length Arm and Universal Round Plate with 1.0 Inch Dia. Ball (Fits 1 Inch to 2.1 Inch Rail Diameter) $29.65
Marine MOUNTING PLATE with 1.0" Dia. Rubber Ball for Selected Eagle, Humminbird and Lowrance Models $14.75
2.5" Dia. Base with 1" Dia. Rubber Ball, Standard Sized Length Arm and Marine Plate for Specified Humminbird, Lowrance, Raymarine Apelco Models $29.95
Marine MOUNTING PLATE with 1.0" Dia. Rubber Sized Ball for Selected Humminbird, Lowrance, Raymarine Apelco Models $16.05
Tallon Receiver Base with Medium Wide Sized Waterproof Aqua Box Holder $119.50
Diamond Base Plate with Standard Sized Length Arm (No Diamond Mounting Plate Adapter) $16.10