Home > Marine / Fishing Mounts > Fish Finder and Chartplotter Assemblies (Eagle, Garmin, Humminbird, Lowrance, Raymarine, etc.) > 1.0" B-Ball Sized Assemblies (5 Pound Max) > RAM-B-107 Series Assemblies >

  2.5" Dia. Base with 1" Dia. Rubber Ball, Standard Sized Length Arm and Marine Plate for Specified Humminbird, Lowrance, Raymarine Apelco Models



 
Price $29.95


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAM-B-107U
Qty:

DESCRIPTION
 
The RAM-B-107U is a marine grade aluminum mount with a 2.5 inch diameter base (RAM-B-202U) with 1 inch rubber "B" sized ball, standard sized length arm (RAM-B-201U) and mounting plate (RAM-B-107BU) with 1 inch diameter rubber ball.
 
NOTE: The RAM-107U has a 1.5" diameter rubber ball with a slightly larger arm. The RAM-107U is recommended for heavier devices, when boating at higher speeds or more extreme water conditions.

The RAM-B-107U is designed to fit the following models:
  • Humminbird All 100 Series
  • Humminbird All 300 Series
  • Humminbird All 500 Series
  • Humminbird All 700 Series
  • Humminbird All Matrix Series (excluding Matrix 97)
  • Humminbird Fishfinder 515
  • Humminbird Fishfinder 525
  • Humminbird Fishfinder 535
  • Humminbird Fishfinder 565
  • Humminbird Fishfinder 585c
  • Humminbird Fishfinder 595c
  • Lowrance Elite-5,Elite-5M,Elite-5x,Elite-5x Pro
  • Raymarine Apelco Fish Finder with matching hole pattern

NOTE: CLICK HERE to see the latest model information (Adobe required).
This product may fit additional devices not listed above. Please use the technical drawing below to see if the hole pattern on your device matches the hole pattern of the mounting plate. Please call us or e-mail by CLICKING HERE for additional information.


RAM-B-107U shown above. Fish finder is not included.


RAM-B-107U Features and Options:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Material: Black powder coated marine grade aluminum, plastic twist knob and two 1 inch diameter rubber balls.
  • Socket Ball Size: 1.0 inch B Ball Size / Max. Weight 5 lbs.
  • NOTE: This mount is also available in a C Ball Size / Max. Weight 10 lbs. Please see the RAM-107U for the "C" Ball sized version.
  • Base Plate Included: RAM-B-202U shown below is a marine grade aluminum universal 2.5 inch diameter plate with a 1.0 inch diameter rubber "B" sized ball. The plate has pre-drilled holes. Mounting hardware is not included.
    
  • Arm Included: RAM-B-201U shown below is the standard sized length marine grade aluminum arm 2.875 inches in length from socket center to socket center and 3.6875 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect in seconds!
    
  • Arm Length Options (NOT INCLUDED):
    • RAM-B-201U-C long "C" length arm 5.1875 inches from socket center to socket center is available. 
  • Security Option (NOT INCLUDED):
    • RAM-KNOB3LU keyed lock shown below is available and replaces the plastic twist knob found on the RAM-B-201 series arm.
       
  • Mounting Plate Included: RAM-B-107BU shown below has pre-drilled holes and 1 inch diameter rubber ball. 
  • NOTE: This marine grade aluminum plate can also be drilled into for a custom hole pattern without voiding the manufacturer's warranty.
                                 


Accessories for this product...
RAM-KNOB3LU RAM-B-201U-A RAM-107U RAM-HOL-AQ1U
Price $17.55
Add
Price $11.60
Add
Price $47.75
Add
Price $43.80
Add
RAM-B-138-AQ6U RAM-B-201U-C
Price $65.00
Add
Price $17.95
Add


Browse for more products in the same category as this item:

Marine / Fishing Mounts > Fish Finder and Chartplotter Assemblies (Eagle, Garmin, Humminbird, Lowrance, Raymarine, etc.) > 1.0" B-Ball Sized Assemblies (5 Pound Max) > RAM-B-107 Series Assemblies


Marine MOUNTING PLATE with 1.0" Dia. Rubber Sized Ball for Selected Humminbird, Lowrance, Raymarine Apelco Models $16.05
Tallon Receiver Base with Medium Wide Sized Waterproof Aqua Box Holder $119.50
Diamond Base Plate with Standard Sized Length Arm (No Diamond Mounting Plate Adapter) $16.10
SHORT Sized Length Arm and Two 3/8"-16 MALE Threaded Posts with 1 Inch Rubber Ball $24.45
2.5 Inch Dia. Round Base with Standard Sized Length Arm (No Diamond Mounting Plate Adapter) $15.75
Diamond Base Plate with SHORT Sized Arm and 1 Inch Ball with 1/4"-20 Male Aluminum Camera Stud $22.80
Diamond Base Plate with Standard Sized Arm and 1 Inch Ball with 1/4"-20 Male Aluminum Camera Stud $22.75
Handlebar Base with ZINC U-Bolt and Standard Sized Length Arm with TWO Universal Diamond Plates $32.95
Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) with Standard Sized Arm and TWO Universal Diamond Plates with 1.0 Inch Dia. Rubber Ball $41.90