Home > Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Waterproof Aqua Box Assemblies with Flex Lens >

  Tallon Receiver Base with Medium Wide Sized Waterproof Aqua Box Holder



 
Price $119.50


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAM-B-103-AQ6-TAL3
Qty:

DESCRIPTION PRODUCT OPTIONS
 
The RAM-B-103-AQ6-TAL3 is a Tallon receiver base with a medium wide sized waterproof "Aqua Box" sized holder.

IMPORTANT NOTE: The aqua box lens WILL NOT WORK WITH CAPACITIVE (swiping) TOUCHSCREENS such as those found on the iPhone. The aqua box lens WILL WORK with resistive touchscreens commonly used on GPS devices. The easiest way to figure out if your device will work with the aqua box lens is to wear a glove and see if you can operate your device. If you can your device will work with the aqua box lens.


Please see the Aqua Box Compatibility Guide for Electronic Devices by clicking here.

RAM-B-103-AQ6-TAl3 shown above.

RAM-B-103-AQ6-TAL3 Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black power coated marine grade aluminum with composite Aqua Box.
  • Socket Ball Size: B-Ball Size = 1.0 inch ball. Max Weight 5 lbs.
  • Overall Length: Please click on Technical Specs above to see the overall length dimensions.
  • Tallon Receiver Base: RAM-B-376-TAL3 marine grade aluminum base with 1 inch diameter rubber ball. 
  • Arm: RAM-B-201U standard sized length arm for 1 inch balls. The arm measures 2.875 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction.
  • Adapter: RAM-B-202U universal 2.5 inch diameter marine grade aluminum round plate with pre-drilled holes attaches to the Aqua Box.
  • Aqua Box: RAM-HOL-AQ6U Internal Dimensions:
    • Width = 4.0"
    • Height = 6.0"
    • Depth = 1.75"
  • Aqua Box External Dimensions:
    • Width = 6.5"
    • Height = 5.25"
    • Depth = 2.0"
    • Please see aqua box description below.
RAM-HOL-AQ6U Description:
1. A unique, patented pending all inclusive seal and Flex-Lens. This is really cool stuff!
2. Touch through lens to operate buttons.
3. Power, earphone and accessory cables are routed through a patent pending, self draining baffle design to keep moisture out.
4. Fits any RAM Mounting System for use on Planes, Motorcycles, Boats, ATVs, Bikes, etc.
5. Easily locks with any standard mini padlock.
6. All marine grade construction including stainless steel hinge pin and mounting hardware.
7. Flex-Lens may be replaced in seconds if scratched or damaged. (inexpensive)
8. Lifetime Warranty on all components other than Flex-Lens.

RAM-B-201U Detailed Description: Black powder coated marine grade aluminum arm allows a 1 inch diameter ball accessory to be connected at either end. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.
Instructions
  • Click here to view Aqua Box knockout hole removal instructions.
  • Click here to view Aqua Box flex lens installation instructions.

Accessories for this product...
RAM-KNOB3LU
Price $17.55
Add


Browse for more products in the same category as this item:

Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Waterproof Aqua Box Assemblies with Flex Lens
Aqua Box Waterproof Mount > Aqua Box Flat Surface Assemblies


Diamond Base Plate with Standard Sized Length Arm (No Diamond Mounting Plate Adapter) $16.10
SHORT Sized Length Arm and Two 3/8"-16 MALE Threaded Posts with 1 Inch Rubber Ball $24.45
2.5 Inch Dia. Round Base with Standard Sized Length Arm (No Diamond Mounting Plate Adapter) $15.75
Diamond Base Plate with SHORT Sized Arm and 1 Inch Ball with 1/4"-20 Male Aluminum Camera Stud $22.80
Diamond Base Plate with Standard Sized Arm and 1 Inch Ball with 1/4"-20 Male Aluminum Camera Stud $22.75
Handlebar Base with ZINC U-Bolt and Standard Sized Length Arm with TWO Universal Diamond Plates $32.95
Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) with Standard Sized Arm and TWO Universal Diamond Plates with 1.0 Inch Dia. Rubber Ball $41.90
Easy Mount Quick Release Adapter Set for RAM-B-238 and RAM Holders $7.65
Diamond Base Plate with Long Arm and Diamond Shape Mounting Plate $28.70