Home > Universal Laptop Mounts > Universal No-Drill Mounts > Universal No-Drill Mounts for Small Electronic Devices (Tablets, Netbooks, LCD, etc.) >

Universal RAM Pod I Single Leg Mount with 1.5 Inch Socket and RAM-HOL-TAB2U Universal Tablet Cradle (Fits Devices Within the Following Dimensions: Height 6.8" to 9", Max Width 5.31", Depth .125 to .56")
Universal RAM Pod I Single Leg Mount with 1.5 Inch Socket and RAM-HOL-TAB2U Universal Tablet Cradle (Fits Devices Within the Following Dimensions: Height 6.8" to 9", Max Width 5.31", Depth .125 to .56")


 

STOCK STATUS: Out of Stock - Email for ETA


Product Code: RAM-316-1-TAB2U
QTY:

DESCRIPTION
 
The RAM-316-1-TAB2U is a single leg pod (1.5 inch socket) mount with a high strength composite cradle designed to fit many tablets within the following dimensions: 
  • Height: 6.8" minimum to 9.0" maximum
  • Width: Maximum width to 5.31 inches
  • Edge Depth: 0.125" to 0.56" maximum

    NOTE: Click here to see the latest information for the RAM-HOL-TAB2U cradle. Contact or email us by clicking here.


    RAM-316-1-TAB2U shown above.
    RAM-316-1-TAB2U Includes the Following:
    • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
    • Base Description: Includes the RAM-316-1-202U. The length of the leg measures 18 inches long when measured at a right angle to the base of the foot. The flexible 18 inch long leg has a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the flexible leg. The rigid flexible arm will hold everything you need safely and securely. The latest in the Mobile In-Car range from RAM. Click on the product link for additional information.
    • Socket Size: RAM "C" sized 1.5 inch ball socket system.
    • Included Cradle: RAM-HOL-TAB2U Features: 
    • Support cups contain open slots to accommodate for devices with or without bumpers/cases sleeves.
    • Back plate can support various size support cups.
    • Spring loaded tension provides secure support of devices.
    • Spring loaded cradle allows for quick release of devices.
    • The cradle allows all cables (NOT INCLUDED) to stay connected and all buttons/ports remain accessible.
    • Cradle Dimensions:
      • Height: 6.8" minimum to 9.0" maximum
      • Width: Maximum width to 5.31 inches
      • Edge Depth: 0.125" minimum to 0.56"
    • Manufacturer's Description Cradle: Get the most out of your tablet with the RAM Tab-Tite spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your device for a near custom fit. This spring loaded design makes it easy to load and unload your device, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your device, allowing access to audio jacks, usb, power, and other ports, your device can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your device.


    Browse for more products in the same category as this item:

    Universal Laptop Mounts > Universal No-Drill Mounts > Universal No-Drill Mounts for Small Electronic Devices (Tablets, Netbooks, LCD, etc.)