RAM-234-3 Universal Tough Tray for Laptops

VEHICLE LAPTOP MOUNTS

Product Request

TMD can order any RAM product. Click here to email a price request or question.

Home > Laptop Accessories >

Universal Laptop Tough Tray

Our Price: $44.95

Stock Status: In Stock

Availability: Usually Ships in 24 Hours
Product Code: RAM-234-3

Description

Dimensions

RAM-234-3 Tough Tray Includes the Following:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty
Laptop Tray: RAM-234-3 "Tough Tray" high strength plastic spring loaded expandable laptop tray. Accommodates laptops from 10-16 inches wide (screen sizes up to 17 inches). The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.
Laptop Tray Options: Alternate laptop trays are available for Panasonic Toughbook series and can be viewed by clicking here. Additional popular accessories such as a screen support to secure the laptop lid in a fixed position and power caddy to hold cords and power supplies is available by clicking here.
NOTE: RAM Mounts recommends the Safe-n-Secure Motion kit (RAM-234-SNMU) if the laptop tray is used to hold electronic devices while the vehicle is in motion and can be found by clicking here.

RAM-234-3 Dimensions:
Tray Depth: 10.0 inches
Tray Thickness: 2.125 inches
Tray Width (Expansion): 10 inches to 16 inches NOTE: Works with 17 inch screens
Side Clamp Arm Height: 0.5 inch (min) to 1.75 inches (max)

RAM-234-3 shown above.

Optional Safe-n-Secure kit RAM-234-SNMU shown above.

Optional screen support RAM-234-S2U shown above.

Features

Using the RAM Mount Laptop Tough Tray
1. Side Arm Location: There are three (3) slots on either side of the RAM Mount Tough Tray that allows the side arms to be connected enabling you to place the arms in the right spot for your all of the side ports and CD/DVD tray opening.

2. Openning/Closing the Tray: To place/remove your laptop from the RAM Mount Tough Tray simply pull against the side of the tray (spring loaded) so the tray is open wide enough to place/remove your laptop.

3. Closing the Laptop: The rubber tip coated, side clamping arms on the RAM Mount Tough Tray can be used to grip around the side of the keyboard section of your laptop which will not allow the screen to be completely closed when in the tray. If you need to close your laptop when in the tray, set the side arms to grip against the side of the keyboard section of your laptop. Also consider the RAM-234-K1-4U Flat side arms to allow the lid to close more flush with the tray.

4. Extra Mounts: There are pre-drilled holes on the side of the tray which allow an RAM Mount accessories to be connected.

5. Tray Assembly: Take a look at the assembly instruction of the RAM-234-3 Tough Tray. Some assembly is required.