themountdepot.com

RAM-111-338U Features and Options:

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
• Plate Material: Black powder coated marine grade aluminum with pre-drilled holes. Please see below for a list of marine devices this plate will accommodate with the standard pre-drilled hole pattern.
• NOTE: This marine grade aluminum plate can also be drilled into for a custom hole pattern without voiding the manufacturer's warranty.
• Plate Dimensions: 6.25 inches * 2 inches with 1.5 inch ball.
• Double Adapter Plate Description: RAM-338U double adapter plate is made of durable light weight aluminum, this plate offers a round and square platform for numerous RAM Mount and aftermarket products. Here are just a few of the ways you can use this product:
  1. Easily place an external GPS or XM antenna behind the factory
  display.
  2. Stack devices so your GPS is just above your fish finder.
  3. Mount your cell phone over your VHF to keep communications
  accessible.
  If you already have a plate with the AMPS hole pattern, this innovative component will easily integrate into your existing system. Well suited to a variety of vehicles and applications, the new RAM Double Adapter Plate is sure to make space and add convenience where ever you need it.

   

• Socket Ball Size: Connects to 1.5 inch C Ball Size / Max. Weight 10 lbs.
• Plate Description: RAM-111BU has many different combination of pre-drilled holes which will match many electronic devices including: CB Radios, Ham Radios, Marine GPS and other devices.  

          

• Base Plate Included: RAM-202U shown below is a marine grade aluminum universal 2.5 inch diameter plate with a 1.5 inch rubber ball. The plate has pre-drilled holes, including the universal AMPS hole pattern.

         

• Arm Included: RAM-201Ushown below is a standard length marine grade aluminum arm 4.55 inches in length from socket center to socket center and 5.625 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
  

    

• Arm Length Options (Not Included):
  • RAM-201U-Bshort "A" arm 2.25 inches from socket center to socket center, is available. Please see RAM-111U-Bfor a complete mounting assembly.
  • RAM-201U-Dlong "D" arm 8.75 inches from socket center to socket center is available. Please see RAM-111U-Dfor a complete mounting assembly.
• The RAM-111-338U will fit the following marine electronic devices:
  

  • Garmin:
    • FishFinder 320C, GPSMAP 180, GPSMAP 182, GPSMAP 182c, GPSMAP 185 Sounder, GPSMAP 188 Sounder, GPSMAP 188C Sounder, GPSMAP 192C, GPSMAP 198C Sounder, GPSMAP 2106, GPSMAP 230, GPSMAP 232, GPSMAP 235 Sounder, GPSMAP 238 Sounder, GPSMAP 3005C, GPSMAP 3006C, GPSMAP 3206, GPSMAP 4008, GPSMAP 4208, GPSMAP 5008, GPSMAP 5208
  • Lowrance:
    
    • 5300C iGPS, LCX-104C, LCX-110C, LCX-111C HD, LCX-17M, LCX-19C, LCX-20C, LCX-25C, LCX-26C HD, LCX-27C, LCX 37C, LMS-332C, LMS-337C DF, LMS-480M, LMS-480M DF, LMS-522C, X102C, X107C DF, X125, X126 DF, X135

  • Humminbird: 
    • 947c 3D Combo, 931c, 937c Combo, 981c SI, 987c SI Combo, Matrix 97, X136 DF

  
  
  NOTE: As the manufacturer adds new models the universal plate may fit additional devices. Please call us or e-mail by clicking here for additional information.