RAM-109H-G1U RAM Mount Swing Arm Mount System

The RAM-109H-G1U is a horizontal surface double swing arm mount that consists of a 6 inch bent swing arm and 6 inch straight swing arm (12 inches in total length). There are two pivoting points on the mount. One at the swing arm and one at the base. Each pivoting point allows a complete 360 degree rotation.

RAM-109H-G1U shown above. NOTE: Base mounting hardware is not included.
A. Swing arm extension is 12 inches.
B. Overall height from bottom of the base to the top of the open end socket is 7 inches.

RAM-109H-G1U Features:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Base Plate Included: RAM-109H-BU shown below is a marine grade aluminum horizontal base with 4 pre-drilled mounting holes. Mounting hardware is NOT included.

Swing Arm Included: One RAM-109-1APU shown below is included. The RAM-109-1APU is a bent 6 inch long extension and includes a 3 inch long bolt, washers and tightening knob.

Swing Arm Included: One RAM-109-2U shown below is included. The RAM-109-2U is a straight 6 inch long extension with open end socket. The open socket will accept any 1.5 inch RAM ball accessory (not included). The RAM-109-2U includes a 3 inch long bolt, washers and tightening knob.

themountdepot.com

VEHICLE LAPTOP MOUNTS

Mounts by Application

.