Home > Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies with Cradle (Apple, Garmin, GPS, Tablets, Video Camera, etc.) > Raymarine >

  2.5 Inch Dia. Base Plate with Short Arm and Raymarine Chartplotter Mounting Plate



 
Price $59.65


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAM-101U-B-RM1
Qty:

DESCRIPTION
 
The RAM-101U-B-RM1 is a C sized 1.5 inch ball flat surface marine grade aluminum mount that has one 2.5 inch diameter plate with pre-drilled holes, short sized arm and mounting plate compatible with the following devices:
  • Raymarine Chartplotter A50
  • Raymarine Chartplotter A50D
  • Raymarine Chartplotter A57D
  • Raymarine Chartplotter A70

NOTE: As the manufacturer adds new units/models to the above series the mounting plate may fit additional models not listed above. Click here for the most current model information RAM-240U-RM1. Please call 224-578-9162 or complete the product inquiry form by clicking here.


RAM-101U-B-RM1 shown above. Base mounting hardware and chartplotter not included.

RAM-101U-B-RM1 Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black power coated marine grade aluminum. 
  • Socket Ball Size: C-Ball Size = 1.5 inch Ball. Maximum suggested weight 10 lbs.
  • Overall Length: 5.24 inches at maximum extension and the mount is collapsible.
  • Base Plate: RAM-202U 2.5 inch diameter base with pre-drilled holes and 1.5 inch diameter rubber ball. The pre-drilled holes accommodate the AMPS hole pattern. Mounting hardware NOT INCLUDED.
  • Arm: RAM-201U-B short length arm for 1.5 inch balls. The arm measures 2.25 inches between socket centers (3.5 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction. A standard arm RAM-201U, 4.55 inches from socket center to socket center (5.625 inches in overall length), is available. Please see  RAM-101-RM1U for the complete assembly. 
  • Mounting Plate: RAM-240U-RM1 3.68 inch diameter mounting base with pre-drilled holes specifically for the electronic devices specified above. Includes mounting hardware for the electronic device.

RAM-202U Description: Black powder coated marine grade aluminum flat surface base with pre-drilled holes including AMPS hole pattern.

RAM-201U-B Description: Black powder coated marine grade aluminum arm allows a 1 inch diameter ball accessory to be connected at either end. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories. 

RAM-201U-B Options (Not Included): The RAM-KNOB5LU shown below is a keyed lock and replaces the twist knob found on the RAM-201 series arm.


Accessories for this product...
RAM-246U RAM-KNOB5LU RAM-111BU RAM-201U-D
Price $19.55
Add
Price $17.55
Add
Price $15.10
Add
Price $34.40
Add


Browse for more products in the same category as this item:

Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies with Cradle (Apple, Garmin, GPS, Tablets, Video Camera, etc.) > Raymarine
Marine / Fishing Mounts > Fish Finder and Chartplotter Assemblies (Eagle, Garmin, Humminbird, Lowrance, Raymarine, etc.) > 1.5" C-Ball Sized Assemblies (10 Pound Max) > Raymarine RM1U Series Assemblies for Selected Chartplotters


2.5 Inch Dia. Base with SHORT Sized Length Arm and 3.68 Inch Square VESA 75mm Compatible Plate $43.95
Rail Base with Double Stainless Steel U-Bolts, Short Sized Arm and 2.5 Inch Dia. Plate $48.65
Rail Base (Stainless Steel U-Bolt), Standard Arm and Plate with 1.5 Inch Ball $38.90
Square Rail Clamp Base 4 Inch Max Width with Standard Arm and 2.5 Inch Mounting Plate $54.10
Square Rail Clamp Base 2.5 Inch Max Width with Standard Arm and 2.5 Inch Mounting Plate $52.05
Rail Base with Double Stainless Steel U-Bolts, Standard Sized Arm and 2.5 Inch Dia. Plate $48.95
2.5 Inch Dia. Base Plate with Standard Arm (Metal Knob) and 2.5 Inch Dia. Adapter Plate $49.50
2.5 Inch Dia. Base Plate with Long Arm (Metal Knob) and 2.5 Inch Dia. Adapter Plate $66.80
2.5 Inch Dia. Base Plate with Standard Arm and 2.5 Inch Dia. Plate with 1/4"-20 Male Aluminum Camera Stud $41.90