Home > RAM Assemblies & Parts > VESA Plates and Mounts > C Ball = 1.5" Ball VESA Mounts >

2.5 Inch Dia. Base with LOCKING Standard Sized Length Arm and 4.75 Inch Square VESA 75/100mm Compatible Plate
2.5 Inch Dia. Base with LOCKING Standard Sized Length Arm and 4.75 Inch Square VESA 75/100mm Compatible Plate


 
Price $94.99

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAM-101LU-246
QTY:

DESCRIPTION
 
The RAM-101LU-246 features a 2.5 inch diameter base, LOCKING standard length sized double socket arm and 4.75 inch square VESA plate. The VESA plate is a square base with 4x75mm and 4x100mm hole patterns.

The mount height is 7.35" tall at maximum extension and is also collapsible.



RAM-101LU-246 shown above.
 
RAM-101LU-246 Features:
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Socket Ball Size: Connects to 1.5 inch C Ball Size / Max. Weight 10 lbs.
  • Material: Black powder coated marine grade aluminum. Rubber ball and socket help dampen vibration.
  • Base Plate Included: RAM-202U shown below is a black powder coated marine grade aluminum universal 2.5 inch diameter plate with a 1.5 inch rubber ball. The plate has pre-drilled holes, including the universal AMPS hole pattern.
         
  • Arm Included: RAM-201LU shown below is a locking standard length sized marine grade aluminum arm 4.55 inches in length from socket center to socket center and 5.625 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
    
  • VESA Plate Design: The plate is the RAM-246U VESA standard plate with an 1.5 inch diameter ball connected to a 4.75 inch square plate. The plate consists of the 4x75mm and 4x100mm VESA hole pattern. Each hole is 25mm in diameter.
   



Browse for more products in the same category as this item:

RAM Assemblies & Parts > VESA Plates and Mounts > C Ball = 1.5" Ball VESA Mounts
RAM Assemblies & Parts > C Ball = 1.5" Ball Assemblies & Parts / Max. Weight 10 lbs. > 1.5" C Ball Assemblies
Flat Surface Mounts > C-Ball = 1.5" Ball Mounts & Parts / Max. Weight 10 lbs. > Flat Surface Assemblies