The Mount Depot

• Cadillace Escalade, Escalade ESV, Escalade EXT (2007-2009)
• Chevrolet Avalanche (2007-2009)
• Chevrolet Silverado (2007-2009)
• Chevrolet Suburban (2007-2009)
• Chevrolet Suburban (Deluxe Power Seats 2007-2009)
• Chevrolet Tahoe (2007-2009)
• GMC Yukon/Yukon XL/Yukon Hybrid (2007-2009)
• GMC Denali Yukon (2007-2009)
• GMC Sierra/Denali Sierra (2007-2009)
• Hummer H2 (2003-2009)

NOTE: As manufacturers redesign vehicle models the vehicle base specified in this laptop mount system may not fit previous or newer generation vehicle models. Please call 224-578-9162 or complete the product inquiry form by clicking here to inquire about your vehicle model if unsure.

This no-drill laptop stand system includes the laptop "Tough Tray", articulating arm, tele-pole and vehicle base. This system installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. See the installation video by clicking here. This laptop configuration provides a telescoping feature that allows a vertical height adjustment range from 12 to 18 inches (additional height ranges are available). Dual swing arms provide articulation and 12 inches of extension from the installation origin of the mounted device (additional extension is available). The patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The laptop tray "Tough Tray" is a spring loaded tray that accommodates 10 to 16 inch wide laptops (17 inch wide screens). The tray features four adjustable retaining arms with a rubber grip feature. These arms can be moved both vertically and horizontally for adjustment to the electronic device being secured. Please read below for features and available customization options (VESA and HAM Radio adapters, printer mounts, laptop tray locks and screen supports, Panasonic Toughbook mounts, etc.)

RAM-VB-159-SW1 Features and Available Options:

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty
• Tough Tray: RAM-234-3 Laptop "Tough Tray" high strength composite spring loaded expandable tray. Accommodates laptops from 10-16 inches wide (screen sizes up to 17 inches). The tray includes 4 side clamping fingers with rubber grips. The fingers are fully adjustable and can be moved both vertically and horizontally.

        

• NOTE: RAM Mounts recommends the RAM-234-SNMU Safe-n-Secure kit if the laptop mount is intended to hold an electronic device while the vehicle is in motion.
• A smaller Tough Tray RAM-234-6 for medium sized device is available. VESA plates, HAM Radio and Panasonic Toughbook laptop trays are also available. The Mount Depot can customize a laptop mount system for your application. 
• Tough Tray Options Listed Below:
  
• RAM-234-S2U locking screen support secures the laptop screen in a locked position.
  
• RAM-234K1-4U flat side arms allow the laptop lid to close flat when not in use.
  
• RAM-234-5U power caddy secures power adapters and cords.
  
• All Tough Tray options can be viewed by clicking here.
  

• Articulating Arm: RAM-VB-110-1U black powder coated steel dual swing arm with 12 inches of total extension. Connects to the Tough Tray and upper tele-pole. 
  

       

• Articulating Arm Options:
  
• RAM-VB-109-3U 6 inch swing arm extension. Provides a total of 18 inches of total extension when added to the RAM-VB-110-1U.
  

• Telescoping Pole: "Tele-Pole" showed assembled with bottom tele-pole RAM-VB-TBF9U and upper tele-pole RAM-VB-TTM8U (far left picture below). The tele-pole allows a height adjustment range from 12 to 18 inches. For an even more custom installation, the tele-pole may be easily cut with a hack saw to a more desired length.
  

        

• Upper Tele-Pole: RAM-VP-TTM8U black powder coated steel 8 inch upper tele-pole mates to the articulating arm and lower tele-pole.
  
• Upper Tele-Pole Dimensions: A = 1.328" OD, B = 2.5", C = 8"

        

• Lower Tele-Pole: RAM-VP-TBF9U black powder coated steel 9 inch lower tele-pole mates to the upper tele-pole and vehicle base.
  
• Lower Tele-Pole Dimensions: A = 1.375" OD, B = 3.5", C = 9"
  
• Tele-Pole Options:
  
• Printer Mounts are available by clicking here.
• RAM-VB-REM1 quick disconnect allows the entire laptop system from the vehicle base upwards to be disconnected by removing a quick release pin. Perfect for individuals using a vehicle for both work and personal use, one of the most popular options!
  
• RAM-VB-ADJ1 Adjust-A-Pole allows additional adjustment of the tele-pole system away from seats or center consoles. NOTE: The RAM-VB-ADJ1 is included in some laptop mounts such as the RAM-VB-159-SW1.
  
• Longer lower tele-poles up to 18 inches and longer upper tele-poles up to 12 inches are available. Additional tele-pole options are available by clicking here.

• Vehicle Base: Black powder coated steel base for the specified vehicles attaches to the passenger seat rails using existing hardware.
• NOTE: Some vehicle bases may limit seat travel.
• NOTE: Seat Configuration: Bucket seats only! 
  

Included RAM-234-3 Tough Tray pictures shown above with dimensions.


Optional

and VESA plates, and Tough Tray II for medium sized electronic devices.

• CHEVROLET 1500 C/K - 2WD (1994-1999)
• CHEVROLET 1500 C/K - 4WD SELECTOR ON DASH ONLY (1994-1999)
• CHEVROLET 2500 C/K (1994-1999)
• CHEVROLET 3500 C/K (1994-1999)
• CHEVROLET BLAZER K-5 (1993-OLDER)
• CHEVROLET SILVERADO (1998-OLDER)
• CHEVROLET SUBURBAN (1994-1999)
• CHEVROLET TAHOE (1994-1999)
• GMC SIERRA (1994-1999)
• GMC YUKON (1994-1999)

This no-drill laptop stand system includes the laptop "Tough Tray", articulating arm, tele-pole and vehicle base. This system installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. See the installation video by clicking here. This laptop configuration provides a telescoping feature that allows a vertical height adjustment range from 12 to 18 inches (additional height ranges are available). Dual swing arms provide articulation and 12 inches of extension from the installation origin of the mounted device (additional extension is available). The patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The laptop tray "Tough Tray" is a spring loaded tray that accommodates 10 to 16 inch wide laptops (17 inch wide screens). The tray features four adjustable retaining arms with a rubber grip feature. These arms can be moved both vertically and horizontally for adjustment to the electronic device being secured. Please read below for features and available customization options (VESA and HAM Radio adapters, printer mounts, laptop tray locks and screen supports, Panasonic Toughbook mounts, etc.)

RAM-VB-103-SW1 Features and Available Options:

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty
• Tough Tray: RAM-234-3 Laptop "Tough Tray" high strength composite spring loaded expandable tray. Accommodates laptops from 10-16 inches wide (screen sizes up to 17 inches). The tray includes 4 side clamping fingers with rubber grips. The fingers are fully adjustable and can be moved both vertically and horizontally.

        

• NOTE: RAM Mounts recommends the RAM-234-SNMU Safe-n-Secure kit if the laptop mount is intended to hold an electronic device while the vehicle is in motion.
• A smaller Tough Tray RAM-234-6 for medium sized device is available. VESA plates, HAM Radio and Panasonic Toughbook laptop trays are also available.  The Mount Depot can customize a laptop mount system for your application. 
• Tough Tray Options Listed Below:
  
• RAM-234-S2U locking screen support secures the laptop screen in a locked position.
  
• RAM-234K1-4U flat side arms allow the laptop lid to close flat when not in use.
  
• RAM-234-5U power caddy secures power adapters and cords.
  
• All Tough Tray options can be viewed by clicking here.
  

• Articulating Arm: RAM-VB-110-1U black powder coated steel dual swing arm with 12 inches of total extension. Connects to the Tough Tray and upper tele-pole. 
  

       

• Articulating Arm Options:
  
• RAM-VB-109-3U 6 inch swing arm extension. Provides a total of 18 inches of total extension when added to the RAM-VB-110-1U.
  

• Telescoping Pole: "Tele-Pole" showed assembled with bottom tele-pole RAM-VB-TBF9U and upper tele-pole RAM-VB-TTM8U (far left picture below). The tele-pole allows a height adjustment range from 12 to 18 inches. For an even more custom installation, the tele-pole may be easily cut with a hack saw to a more desired length.
  

        

• Upper Tele-Pole: RAM-VP-TTM8U black powder coated steel 8 inch upper tele-pole mates to the articulating arm and lower tele-pole.
  
• Upper Tele-Pole Dimensions: A = 1.328" OD, B = 2.5", C = 8"

        

• Lower Tele-Pole: RAM-VP-TBF9U black powder coated steel 9 inch lower tele-pole mates to the upper tele-pole and vehicle base.
  
• Lower Tele-Pole Dimensions: A = 1.375" OD, B = 3.5", C = 9"
  
• Tele-Pole Options:
  
• Printer Mounts are available by clicking here.
• RAM-VB-REM1 quick disconnect allows the entire laptop system from the vehicle base upwards to be disconnected by removing a quick release pin. Perfect for individuals using a vehicle for both work and personal use, one of the most popular options!
  
• RAM-VB-ADJ1 Adjust-A-Pole allows additional adjustment of the tele-pole system away from seats or center consoles. NOTE: The RAM-VB-ADJ1 is included in some laptop mounts such as the RAM-VB-159-SW1.
  
• Longer lower tele-poles up to 18 inches and longer upper tele-poles up to 12 inches are available. Additional tele-pole options are available by clicking here.

• Vehicle Base: Black powder coated steel base for the specified vehicles attaches to the passenger seat rails using existing hardware.
• NOTE: Some vehicle bases may limit seat travel.
  

Included RAM-234-3 Tough Tray pictures shown above with dimensions.


Optional

and VESA plates, and Tough Tray II for medium sized electronic devices.

This no-drill laptop stand system includes the laptop "Tough Tray", articulating arm, tele-pole and vehicle base. This system installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This laptop configuration provides a telescoping feature that allows a vertical height adjustment range from 12 to 18 inches (additional height ranges are available). Dual swing arms provide articulation and 12 inches of extension from the installation of the mounted device (additional extension is available). The patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The laptop tray "Tough Tray" is a spring loaded tray that accommodates 10 to 16 inch wide laptops (17 inch wide screens). The tray features four adjustable retaining arms with a rubber grip feature. These arms can be moved both vertically and horizontally for adjustment to the electronic device being secured. Please read below for features and available customization options (VESA and HAM Radio adapters, printer mounts, laptop tray locks and screen supports, Panasonic Toughbook mounts, etc.)

RAM-VB-102-SW1 Features and Available Options:

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty
• Tough Tray: RAM-234-3 Laptop "Tough Tray" high strength composite spring loaded expandable tray. Accommodates laptops from 10-16 inches wide (screen sizes up to 17 inches). The tray includes 4 side clamping fingers with rubber grips. The fingers are fully adjustable and can be moved both vertically and horizontally.

        

• NOTE: RAM Mounts recommends the RAM-234-SNMU Safe-n-Secure kit if the laptop mount is intended to hold an electronic device while the vehicle is in motion.
• A smaller Tough Tray RAM-234-6 for medium sized device is available. VESA plates, HAM Radio and Panasonic Toughbook laptop trays are also available.  The Mount Depot can customize a laptop mount system for your application. 
• Tough Tray Options Listed Below:
  
• RAM-234-S2U locking screen support secures the laptop screen in a locked position.
  
• RAM-234K1-4U flat side arms allow the laptop lid to close flat when not in use.
  
• RAM-234-5U power caddy secures power adapters and cords.
  
• All Tough Tray options can be viewed by clicking here.
  

• Articulating Arm: RAM-VB-110-1U black powder coated steel dual swing arm with 12 inches of total extension. Connects to the Tough Tray and upper tele-pole. 
  

       

• Articulating Arm Options:
  
• RAM-VB-109-3U 6 inch swing arm extension. Provides a total of 18 inches of total extension when added to the RAM-VB-110-1U.
  

• Telescoping Pole: "Tele-Pole" showed assembled with bottom tele-pole RAM-VB-TBF9U and upper tele-pole RAM-VB-TTM8U (far left picture below). The tele-pole allows a height adjustment range from 12 to 18 inches. For an even more custom installation, the tele-pole may be easily cut with a hack saw to a more desired length.
  

        

• Upper Tele-Pole: RAM-VP-TTM8U black powder coated steel 8 inch upper tele-pole mates to the articulating arm and lower tele-pole.
  
• Upper Tele-Pole Dimensions: A = 1.328" OD, B = 2.5", C = 8"

        

• Lower Tele-Pole: RAM-VP-TBF9U black powder coated steel 9 inch lower tele-pole mates to the upper tele-pole and vehicle base.
  
• Lower Tele-Pole Dimensions: A = 1.375" OD, B = 3.5", C = 9"
  
• Tele-Pole Options:
  
• Printer Mounts are available by clicking here.
• RAM-VB-REM1 quick disconnect allows the entire laptop system from the vehicle base upwards to be disconnected by removing a quick release pin. Perfect for individuals using a vehicle for both work and personal use, one of the most popular options!
  
• RAM-VB-ADJ1 Adjust-A-Pole allows additional adjustment of the tele-pole system away from seats or center consoles. NOTE: The RAM-VB-ADJ1 is included in some laptop mounts such as the RAM-VB-159-SW1.
  
• Longer lower tele-poles up to 18 inches and longer upper tele-poles up to 12 inches are available. Additional tele-pole options are available by clicking here.

• Vehicle Base: Black powder coated steel base for the specified vehicles attaches to the passenger seat rails using existing hardware. NOTE: Some vehicle bases may limit seat travel.
• NOTE: THIS BASE WILL NOT WORK WITH POWER SEATS (RAM-VB-131A-SW1 Required).
  

Included RAM-234-3 Tough Tray pictures shown above with dimensions.


Optional